NLV25T-150J-EFD Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Inductors are electronic components used in the power supply, signal conditioning, and decoupling of electrical equipment. The NLV25T-150J-EFD is an example of a fixed inductor, which is a type of inductor with a predetermined inductance value. This article will discuss the application area and working principle of the NLV25T-150J-EFD.

Application field

The NLV25T-150J-EFD is used primarily as an attenuator in applications such as power supplies and signal conditioning. It can also be used in a wide variety of applications such as noise suppression, filtering, and voltage regulation.

In power supply applications, the NLV25T-150J-EFD is used as an inductor to reduce the voltage ripple and ensure stable output voltage. It has an inductance value of 150μH, which is enough to meet the minimum inductance requirement for most applications. The low DC resistance of 0.55Ω also helps to reduce power loss.

In signal conditioning applications, the NLV25T-150J-EFD can be used as an attenuator to reduce the amplitude of input signals. It can also be used to increase the load capacity of the signal path or to adjust the gain of the signal.

The NLV25T-150J-EFD is also suitable for use in noise suppression applications. Its high frequency resonance characteristics help to reduce noise produced by other components. It is also used in filtering applications to reduce the ripple of high frequency signals and to eliminate unwanted frequencies.

Working principle

Fixed inductors, such as the NLV25T-150J-EFD, are electronic components consisting of two conducting coils separated by a core material. In this case, the core material is ferrite. When an AC current passes through the inductor, it loses energy through the inductive reactance of the coils. This energy is stored in the magnetic field created by the coils, which is then dissipated in the form of heat.

In a load path application, the NLV25T-150J-EFD acts as a load, reducing the amplitude of the input signal. As the current passes through the inductor, it experiences an impedance, which reduces the current flow and attenuates the signal. The inductance value of the NLV25T-150J-EFD is 150 μH, which is sufficient to have an attenuating effect on the input signal without introducing too much signal distortion.

In noise suppression and filtering applications, the NLV25T-150J-EFD is used to limit the flow of current. This reduces the amount of noise produced by other components and helps to eliminate unwanted frequencies. The NLV25T-150J-EFD has a high frequency resonance, which helps to reduce the amount of high frequency noise present in the system.

The NLV25T-150J-EFD is a versatile component that can be used in a variety of applications. Its high inductance value, low DC resistance, and high frequency resonance make it suitable for use in power supplies, signal conditioning, noise suppression, and filtering applications. Overall, it is an ideal component for any type of application where a stable voltage source is required or where signal attenuation is desired.

The specific data is subject to PDF, and the above content is for reference