NLV25T-2R2J-PFD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, such as the NLV25T-2R2J-PFD, are electrical components that tend to store energy in the form of magnetic fields when current is passed through a coil. This particular fixed inductor is a Non-Polarized Aluminum Electrolytic type inductor with an Inductance of 20 uH and a Rated Current of 2.2 A. It has a Operating Temperature of -40 to +105 °C and is a Surface Mount device.

The primary application of the NLV25T-2R2J-PFD is in the circuit design of power supplies. Fixed inductors are needed in power supply designs because they restrict the flow of current, help to smooth out voltage surges, and, in addition, help reduce power loss. In fact, fixed inductors are used to create filters in power supplies that help reduce EMI interference by keeping power at a smooth level.

The working principle of the NLV25T-2R2J-PFD is based on the fact that when current passes through the coil it generates a magnetic field. This magnetic field is stored in the inductor and, when appropriate current is supplied, it will build up during the process of inductance. This stored magnetic energy can then be used as needed when the current flow is reduced or stopped.

The inductance of a fixed inductor such as the NLV25T-2R2J-PFD is measure in microhenries (uH) and is directly related to the number of turns in the coil. The higher the number of turns, the higher the inductance. The rated current, on the other hand, is determined by the number of amperes the inductor is designed to handle without damage.

Another important factor to consider when using fixed inductors such as the NLV25T-2R2J-PFD is to ensure that inductive kickback of current does not occur. Inductive kickback occurs when a quickly changing current creates an opposing magnetic field that can short circuit the circuit. To prevent this from occurring, a snubber resistor or diode is typically used, in order to shunt the kickback voltage.

In summary, the NLV25T-2R2J-PFD is a fixed inductor used for power supply and other circuit designs. This particular model has an Inductance of 20 uH and a Rated Current of 2.2 A. Its primary application is to restrict the flow of current and smooth out voltage surges to help reduce power loss and EMI interference. However, its use must be accompanied by the installation of a snubber resistor or diode in order to prevent inductive kickback of current.

The specific data is subject to PDF, and the above content is for reference