NLV25T-R39J-PFD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are a type of component that is widely used in a variety of electrical applications. The NLV25T-R39J-PFD is a specific type of fixed inductor that is designed to provide an inductance value of 25uH. This inductor is typically used in applications that require a low DC resistance of 0.45 ohms and a high SRF of 50MHz.

The inductor is a passive electronic component with two terminals – one at either end. It is usually made from a conducting material that can be air, ferrite or iron. The main working principle of a fixed inductor revolves around Faraday’s Law of Induction, which states that when a current flows through a conductor, a magnetic field is created. As the magnitude of the current increases, the magnetic field increases in strength, which in turn induces another current in the same direction.

In practice, a fixed inductor can be constructed to produce a constant value of inductance, as this is the primary factor that determines its properties. This is usually accomplished by winding the conductor around a ferrite core, which acts as an impedance. The winding will be specified to produce a certain value of inductance, so the NLV25T-R39J-PFD will have a winding that will produce exactly 25uH.

The NLV25T-R39J-PFD inductor is typically used in applications that require filtering and decoupling of high frequency or constant current. It can also be used in resonance circuits, transformers, traction control systems, and power management systems. The low DC resistance of this inductor makes it ideal for applications that require a low current. It is also suitable for use in a wide variety of other applications, including radios, televisions, antennas, and any other electronic devices that require an inductive component.

In conclusion, the NLV25T-R39J-PFD is a specific type of fixed inductor that is designed to provide an inductance value of 25uH. It is usually made from a conducting material, typically air, ferrite or iron, and is primarily used in applications that require filtering and decoupling of high frequency or constant current. It is also suitable for use in resonance circuits, transformers, traction control systems, and power management systems.

The specific data is subject to PDF, and the above content is for reference