NMP1K2-C#CCC#-00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The NMP1K2-C#CCC#-00 is an AC-DC converter, classified as a bridge rectifier, also known as a full wave rectifier. The converter offers excellent performance in a variety of applications, making it an ideal choice for AC-DC conversion. Its primary use is in power supplies, but it can also be used in inverters, controllers, rectifiers, and other power applications.

The NMP1K2-C#CCC#-00 operates by converting alternating current (AC) into direct current (DC). This is achieved through the bridge rectification process, whereby the current flow is altered by the action of four diodes arranged in a bridge circuit. When a cyclic alternating current is applied across the terminals of the bridge, a pulsed output waveform is created. This waveform can then be processed further with the help of filters to provide a full DC voltage.

The NMP1K2-C#CCC#-00 provides excellent efficiency with high power and operating voltage ratings. As with any AC-DC converter, the converter can provide lower power demand, higher efficiency and better noise rejection compared to linear regulators. The converter is capable of handling input AC voltage swings from 3 kV, with an output voltage rating of up to 56 VDC.

The operating principle of the NMP1K2-C#CCC#-00 bridge rectifier is based on the process of rectification. This is accomplished by the rectification of the alternating waveform across the terminals of the rectifier unit, which results in a pulsed output of direct current. This waveform is then processed further with the help of filters, and pulsation smoothing capacitors, to obtain the desired output voltage and current waveform.

This bridge rectifier is used in a plethora of applications, such as industrial motor control, AC power transmission, switching power supplies, frequency controlling and voltage stabilization. It is a frequently used device in industry and can achieve high performances for voltage regulation and current transformation.

The NMP1K2-C#CCC#-00 can be used to create an AC supply from single or three phase supplies. The unique design of this rectifier provides an efficient power transfer from an AC supply to a DC output. The converter also boasts a good input voltage-to-output voltage ratio, making it ideal for applications where a high efficiency is required.

The converter is also suited to applications in which the input and output frequency must be matched, such as in motor control and power transmission applications. By using the reverse direction of operation, the converter can be used to control the frequency of an AC oscillator.

By using the NMP1K2-C#CCC#-00 bridge rectifier, a large variety of applications can be efficiently powered. The device offers excellent performance in terms of efficiency, noise rejection and voltage regulation, making it an ideal choice for AC-DC conversion. Its small size, high power ratings and cost effective design make it an appealing choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference