NMP1K2-C#H#KC-00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC DC Converters

AC/DC converters are electrical devices used to convert alternating current (AC) electricity to direct current (DC) or DC to AC electricity. AC/DC converters are found in a variety of industrial and electrical circuits, as well as in low-current applications such as for portable electronics and laptop computers. Typically, the area in which an AC/DC converter can be found is in the power transmission and related industries, such as electric utilities supplying electricity to home and commercial applications.

One type of AC/DC converter is the NMP1K2-C#H#KC-00 power conversion AC/DC converter. This type of converter is used to convert AC mains voltage into DC backbone voltage with a maximum efficiency of 98%. The NMP1K2-C#H#KC-00 is capable of accepting voltages from 0 to 300 volts AC input to output voltages of 12 volts DC. The converter features a low voltage start-up voltage of 230 volts and is automatically adjusted when the input power voltage is over 280 volts. The NMP1K2-C#H#KC-00 AC/DC converter is also capable of soft-starting and over-voltage protection, as well as over-heat, short-circuit and over-current protection.

The NMP1K2-C#H#KC-00 AC/DC converter is a power conversion device that is based on a full-bridge control circuit. It uses a voltage reference, an error amplifier, a duty-cycle correction circuit, a control circuit, an output voltage feedback and modulation circuits, a signal monitor, and a reset circuit. The voltage reference sets the output voltage of the converter, while the error amplifier provides feedback to the control circuit, keeping the output voltage stable. The duty-cycle correction circuit helps maintain the output level during transient loads. The control circuit dynamically adjusts current flow through the full-bridge circuit. The output voltage feedback and modulation circuits allow for rapid response to changes in input voltage and current. The signal monitor notifies the system of short-circuit and over-voltage conditions, and the reset circuit is activated if the integrated circuit becomes overloaded.

The NMP1K2-C#H#KC-00 AC/DC converter is designed to provide high efficiency and a wide input voltage range. It is ideal for use in industrial applications such as UPS systems, motor drives, and other motor control applications. It is also suitable for home and commercial applications such as air conditioners, refrigerators, televisions, and computers. Due to its high efficiency, the converter is well-suited for use in power-saving products and applications. It is a reliable and cost-effective solution for AC/DC power conversion.

The specific data is subject to PDF, and the above content is for reference