NMP1K2-#CEC#C-00

AC-DC converters are electronic components used to convert alternating current (AC) energy to a direct current (DC) for use in a variety of applications ranging from solar power conversion to industrial robotics. One such device is the NMP1K2-#CEC#C-00, which is a DC-DC isolated, dual output converter designed with fewer components and higher efficiency.

The NMP1K2-#CEC#C-00 is rated to run up to 12 volt and 50 watts. It provides dual output ranges of 0.8 to 5.0VDC and 3.3-28V DC. The input voltage range is from 9 to 18VDC. It can also accept a wide range 4-40V AC input. The device features over-current protection, short circuit protection, over-voltage protection, and thermal protection. It also has an efficiency of up to 90 percent, and a wide temperature operating range of -40 to +105°C.

The NMP1K2-#CEC#C-00 can be used in embedded systems, industrial and process automation, automotive, battery, telecommunications, and alternative energy sources. It is typically used to power two independent DC loads, or to power a single load from a dual voltage source. For example, when used with solar panels, the converter can be used to supply the correct voltages to charge a 12V system and power a DC motor. It can also be used in energy-efficient applications such as LED lighting, and to provide increased efficiency in higher wattage applications.

The NMP1K2-#CEC#C-00 uses pulse width modulation (PWM) to control the current and voltage output of the device. This type of control is based on the principle of converting electrical energy into a train of pulses of a constant frequency but with an adjustable pulse width. The width of these pulses is directly proportional to the amount of electricity needed to produce the desired level of output. The controller for the device also regulates the output voltage by sensing the voltage of the load and adjusting the pulse width in order to maintain the desired output voltage. This is known as voltage mode control.

The NMP1K2-#CEC#C-00 is a highly reliable and efficient device for converting AC to DC, and is well suited for many different applications. Its wide input and output ranges and ability to regulate voltage make it an ideal choice for embedded, industrial, automotive, and alternative energy systems. Its high efficiency and over-voltage, over-current, and thermal protection features make it a reliable and safe choice for many applications.