NMP1K2-#KCHHC-00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC/DC converters are essential to any electronic system, from simple wall adapters to sophisticated motor controllers. NMP1K2-#KCHHC-00 belongs to this category of converters and is commonly used for power applications. This article briefly describes the application field and working principle of NMP1K2-#KCHHC-00ac/dc converters.

NMP1K2-#KCHHC-00is a medium-performing AC/DC converter that can provide an output of up to 3000 W. It is typically used for the supply of power to electric motors and other similar loads. In addition, it can also be used for series current or voltage conversion. The converter has a wide input voltage range of 90 to 132 VAC, and can operate between 50 and 60 Hz. In terms of output, NMP1K2-#KCHHC-00 offers three voltage ranges – 24, 48, or 115 volts. It has a high efficiency rating of 92 percent at full load and a power factor of 0.9.

NMP1K2-#KCHHC-00 is based on a single-phase full-wave bridge rectifier design. It features high-frequency operation, allowing for a low-profile and compact design that is not otherwise possible with a low-frequency converter. The rectifier is based on four thyristors, two of which are triggered on each half-cycle. The applied AC voltage acts as a DC voltage source for the inverter, where the DC voltage is converted into variable AC voltage using a thyristor bridge. This way, the converter is able to provide a high-performance output.

The thyristor bridge is the key component in the NMP1K2-#KCHHC-00ac/dc converter. It consists of four SCRs connected in a bridge formation. When an AC voltage is applied, the SCRs are triggered in pairs, with each SCR providing the optimal firing angle. This allows for smooth current flow through the bridge and for efficient conversion of the applied AC voltage into a variable AC voltage. The variable AC voltage is then sent to the load.

In addition to the thyristor bridge, the converter also features a control circuit. This allows the converter to be used in either a constant voltage or a constant current mode. When used in constant voltage mode, the control circuit ensures that the output voltage stays within the desired limits. When used in constant current mode, the control circuit ensures that the output current stays within the desired limits. This allows the converter to be used in a wide range of applications.

NMP1K2-#KCHHC-00 is a reliable and efficient ac/dc converter that is suitable for a wide range of applications. It has a wide input voltage range and can provide a high-performance output. The converter is based on a single-phase full-wave bridge rectifier design, which allows for low-profile and compact designs. It can be used in either a constant voltage or a constant current mode, allowing for a wide range of applications. Overall, NMP1K2-#KCHHC-00 is an excellent choice for applications requiring a reliable and efficient ac/dc converter.

The specific data is subject to PDF, and the above content is for reference