NRS5014TR47NMGG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors play a critical role in circuit design, as they affect the power and signal flow in electronic circuits. The NRS5014TR47NMGG is a fixed inductor used in different types of circuits. The NRS5014TR47NMGG is a commonly used component used in power supplies, filters, fly-back converters, EMP protection, voltage regulators, buck converters, and other similar applications.

The NRS5014TR47NMGG is an axial type inductor small enough to fit into many miniature devices. The inductor consists of a small ferrite core which is enclosed in a metal or plastic casing. This casing consists of an outer winding and an inner winding, which are wrapped around the core. The inductance of the inductor is determined by the number of turns, the diameter of the wire used, and the type of material used for the core and casing.

The NRS5014TR47NMGG is a high-frequency inductor with a high saturation current rating. The inductance of the inductor ranges from 2.2 mH to 15 mH. The inductance is stable over a wide temperature range, from -40°C to +105°C. The inductor can withstand a surge of 10mA for 1 minute.

The primary purpose of the NRS5014TR47NMGG is to reduce power dissipation in a circuit. Inductors are used in power supplies, as they can reduce the amount of energy wasted when power is transferred from one component to another. Inductors can reduce the amount of power dissipated in low power circuits, while also providing protection against over-voltage and over-current.

Inductors are also used in filter circuits, as they can control the frequency response of the circuit. Inductors are typically used in low and high-pass filters, as they can affect the magnitude and phase of the signal passing through the filter. Inductors can also be used in notch filters to reduce the amplitude of a certain frequency range.

Inductors are also commonly used in fly-back converters and voltage regulators. In a fly-back converter, the inductor is used to store energy, which is then released during a certain cycle. This energy is then transferred to the output capacitor, which in turn supplies power to the load. In a voltage regulator, the inductor is used to reduce the ripple voltage, as it can store energy and smooth out the voltage spikes.

The NRS5014TR47NMGG can also be used in protection circuits, as it can help to protect devices from voltage or current surges. The inductor can provide protection against Electro-Magnetic Pulses (EMP’s) or against high voltage spikes.

The NRS5014TR47NMGG is a high-performance inductor that can be used in many different types of electronic circuits. The inductor is small enough to fit into many compact devices, and it is rated for a wide temperature range. The inductor can also handle a large surge of current and can be used in protection circuits. The inductor can be used for power supplies, filters, fly-back converters, protection circuits, voltage regulators, and more.

The specific data is subject to PDF, and the above content is for reference