Allicdata Part #: | NSL-19-018-ND |
Manufacturer Part#: |
NSL-19-018 |
Price: | $ 0.65 |
Product Category: | Sensors, Transducers |
Manufacturer: | Luna Optoelectronics |
Short Description: | PHOTOCELL CDS RES 550NM TO-18 |
More Detail: | CDS Cell 550nm 9 ~ 15 kOhms @ 21 lux |
DataSheet: | NSL-19-018 Datasheet/PDF |
Quantity: | 1000 |
2000 +: | $ 0.59078 |
Series: | -- |
Part Status: | Active |
Wavelength: | 550nm |
Voltage - Max: | 100Vpk |
Cell Resistance (Min) @ Dark: | 1 MOhms @ 5s |
Cell Resistance @ Illuminance: | 9 ~ 15 kOhms @ 21 lux |
Operating Temperature: | -60°C ~ 75°C (TA) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical sensors are devices that detect and interpret the light in order to monitor and/or control tasks or environments. Photo detectors are a type of optical sensors that use light to generate an electrical signal. CdS cells are one type of photo detectors that often utilize photo conductivity to detect light. NSL-19-018 is a type of CdS cell that is utilized in light-sensing applications. This article will discuss the application field and working principle of the NSL-19-018 CdS cell.
Application Field
The NSL-19-018 CdS cell is used in various light-sensing applications, such as in security systems, motion sensors, fire alarms, and light sensors. It is widely used in applications where a fast response time is necessary, such as automatic door openers and lighting control systems. It is also used in many televisions, digital cameras, and other consumer electronics. In these applications, the cell is used to detect light levels, changes in ambient light, or changes in the intensity or direction of light.
Working Principle
The NSL-19-018 CdS cell is based on a photoresistive semi-conductor that changes its electrical resistance in response to light. It consists of a cadmium sulfide (CdS) layer between two electrodes. When exposed to light, the CdS layer generates electrons, which pass through the circuit, producing a measurable electrical current. The more light, the higher the current. The NSL-19-018 CdS cell is sensitive to a wide range of visible and infrared light, and its surface area can be altered in order to optimize sensitivity for a particular application.
The NSL-19-018 CdS cell operates in a simple manner. The signals it produces can easily be converted into analog or digital output formats. It is usually powered by a low voltage, such as 3V or 5V. The CdS cell is also designed to protect itself from over current and reverse polarity. This is done by using resistors or diodes to limit the amount of current flowing through the device, and by using a reverse-protection circuit to prevent any accidental reverse voltage from damaging the cell.
Conclusion
The NSL-19-018 CdS cell is a photoresistive semi-conductor used in light-sensing applications, and it is widely used in security systems, motion sensors, fire alarms, and light sensors. It operates on a simple principle in which light generates electrons which pass through the circuit, producing a measurable electrical current. The CdS cell is also protected against over current and reverse polarity, and its surface area can be adjusted to optimize its sensitivity for a particular application.
The specific data is subject to PDF, and the above content is for reference
PHOTORESISTOR FOR BASIC STAMPCDS Cell 2...
PHOTOCELL 50K-150K OHM 7.2MMCDS Cell 520...
PHOTOCELL 15K-60K OHM 7.2MMCDS Cell 520n...
PHOTOCELL 8K-24K OHM 7.2MMCDS Cell 520nm...
PHOTOCELL 3.6K-14.4K OHM 7.2MMCDS Cell 5...
PHOTOCELL 2K-6K OHM .89MMCDS Cell 2 ~ 6...