NWW5JT20R0

Series:	WW
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	20 Ohms
Tolerance:	±5%
Power (Watts):	5W
Composition:	Wirewound
Features:	Moisture Resistant, Non-Inductive
Temperature Coefficient:	±20ppm/°C
Operating Temperature:	-55°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.312" Dia x 0.875" L (7.92mm x 22.23mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole ResistorsThrough hole resistors (sometimes referred to as thru-hole resistors) are resistive components that are installed through holes in circuit boards. They are typically used in low-frequency circuits such as audio circuits as well as high-speed digital circuits, and they are available in various sizes and configurations. Through hole resistors are sometimes referred to as "standard" resistors, as they are the most commonly used type of resistive component.The NWW5JT20R0 is a through-hole resistor designed for use in low-frequency and high-speed digital circuits. It is a compact resistor that can be used in space-restricted applications where a larger size resistor would be impractical. This resistor utilizes a thin film construction which allows for low-noise operation at a wide range of DC and AC frequencies. The NWW5JT20R0\'s maximum DC operating voltage is 20V, and it has a power rating of 0.5W.The NWW5JT20R0 can be used in a variety of applications, such as analog and digital signal circuits, power supply circuits, and temperature sensing circuits. It is used to increase the voltage drop across a component, reducing noise and extending its life. The NWW5JT20R0 can also be used as a current limiting resistor, allowing current to flow freely when it reaches the resistor\'s maximum voltage or power rating. Additionally, this type of resistor can be used to regulate the power consumed by a component, ensuring that it is not damaged by too much current.The NWW5JT20R0 has a working principle based on Ohm\'s Law, which states that the current through a resistor is directly proportional to its voltage. This means that the current through a resistor is inversely proportional to its resistance. By controlling the resistance of the resistor, it is possible to control the current flow through it. This is done by increasing or decreasing the resistance, which alters the voltage drop across the resistor and controls how much current flows through it.The NWW5JT20R0 is a reliable and cost-effective solution for applications in which standard or larger size resistors would not be practical. It is highly accurate and maintains its performance and lifetime even when exposed to high temperature environments and extended humidity. It is also resistant to corrosion and oxidation, making it a great choice for applications requiring long-term reliability and performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description