Allicdata Part #: | 67-1560-5-ND |
Manufacturer Part#: |
OCP-PCT114/E |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Lumex Opto/Components Inc. |
Short Description: | OPTOISOLATR 5KV TRANSISTOR 4-DIP |
More Detail: | Optoisolator Transistor Output 5000Vrms 1 Channel ... |
DataSheet: | OCP-PCT114/E Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Output Type: | Transistor |
Supplier Device Package: | 4-DIP |
Package / Case: | 4-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -30°C ~ 100°C |
Vce Saturation (Max): | 300mV |
Current - DC Forward (If) (Max): | 50mA |
Voltage - Forward (Vf) (Typ): | 1.2V |
Current - Output / Channel: | 50mA |
Voltage - Output (Max): | 60V |
Series: | -- |
Input Type: | DC |
Rise / Fall Time (Typ): | 5µs, 4µs |
Turn On / Turn Off Time (Typ): | -- |
Current Transfer Ratio (Max): | 600% @ 2mA |
Current Transfer Ratio (Min): | 60% @ 2mA |
Voltage - Isolation: | 5000Vrms |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators – Transistor, Photovoltaic Output (OCP-PCT114/E) are devices used to provide electrical isolation between two parts of a circuit. They are also referred to as opto-isolators, optocouplers, photocouplers, or photo-transistors. This article will discuss their application field and working principle.
Application Field
The OCP-PCT114/E optoisolator has various applications within the industrial environment. This device is mainly used for controlling electrical signals through isolation, and can be used as an interface between sensor outputs and digital/analog control systems. It can also be used in applications such as instrumentation, temperature control, energy management, and alarm systems.
This type of optoisolator is also commonly used in industrial automation systems. It can be used for many types of applications, such as signal conversion, signal conversion from a sensor to an analog output, and communication between two parts of a circuit. In addition, the OCP-PCT114/E optoisolator can be used for voltage switch signals, switching devices, and latch applications.
The OCP-PCT114/E optoisolator can be used for applications which require electrical isolation and good signal isolation. It is also suitable for high-speed digital applications, as it can be used as a digital isolator for high-speed signals. The OCP-PCT114/E optoisolator can also be used for high voltage applications as it is an excellent choice for voltage isolation. In addition, the optoisolator is suitable for applications where power consumption needs to be minimized.
Working Principle
The OCP-PCT114/E optoisolator works by using an optical transmission medium to transfer an electrical signal from one side of the device to the other without actually conducting electricity. When a current is passed through the LED (Light Emitting Diode), photons are generated, which are then collected by the photodiode on the other side of the device. This device then converts the photons into an electrical current, which is sent back to the input side of the device.
The OCP-PCT114/E optoisolator is also capable of providing electrical isolation between its input and output. This means that there is no direct connection between the two sides of the device, preventing electrical interference and allowing for higher signal isolation. In addition, the OCP-PCT114/E optoisolator allows for a high degree of isolation between its input and output signals. This means that the output signal is not affected by noise on the input or by other signals on the same line.
The OCP-PCT114/E optoisolator is an excellent choice for providing electrical isolation in many types of applications. Its high isolation performance makes it suitable for applications where there is a need for electrical isolation, such as in instrumentation, temperature control, energy management, and alarm systems. The OCP-PCT114/E optoisolator is also suitable for applications which require high-speed digital signals, as it can provide excellent signal isolation. In addition, its low power consumption makes it suitable for applications which require power minimization.
Overall, the OCP-PCT114/E optoisolator is an excellent choice for providing electrical isolation and signal conversion in a variety of applications. Its high isolation performance and low power requirements make it suitable for a range of applications, from industrial automation systems to instrumentation and energy management. In addition, its fast response time and high isolation capability make it ideal for applications which require high-speed digital signals. As a result, it can provide excellent signal isolation and noise suppression in a variety of environments.
The specific data is subject to PDF, and the above content is for reference
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...