Allicdata Part #: | 67-1561-5-ND |
Manufacturer Part#: |
OCP-PCT218/E |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Lumex Opto/Components Inc. |
Short Description: | OPTOISOLATOR 5KV 2CH TRANS 8-DIP |
More Detail: | Optoisolator Transistor Output 5000Vrms 2 Channel ... |
DataSheet: | OCP-PCT218/E Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Output Type: | Transistor |
Supplier Device Package: | 8-DIP |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -30°C ~ 100°C |
Vce Saturation (Max): | 300mV |
Current - DC Forward (If) (Max): | 50mA |
Voltage - Forward (Vf) (Typ): | 1.2V |
Current - Output / Channel: | 50mA |
Voltage - Output (Max): | 60V |
Series: | -- |
Input Type: | DC |
Rise / Fall Time (Typ): | 5µs, 4µs |
Turn On / Turn Off Time (Typ): | -- |
Current Transfer Ratio (Max): | 600% @ 2mA |
Current Transfer Ratio (Min): | 60% @ 2mA |
Voltage - Isolation: | 5000Vrms |
Number of Channels: | 2 |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are a type of widely used electronic components used to isolate two circuits from each other. The OCP-PCT218/E model belongs to the optoisolators - transistor, photovoltaic output category. It is typically used for optical coupling of low-voltage and low-power circuits, including logic signals, timers, and digital controllers. It is a low-cost component, easy to install and it enjoys a wide range of applications.
The typical schematic of the OCP-PCT218/E is shown in the figure below. The OCP-PCT218/E optoisolator is mainly composed of an infrared LED, an integrated photoresistor and an NPN transistor. The LED provides light to the photo-resistor, and the current flowing through the LED is regulated by the photoresistor. The current is then applied to the base of the transistor, which can turn on or off the transistor. This is the working principle of the OCP-PCT218/E.
The OCP-PCT218/E supports a wide range of input and output voltages, from 3.3V to 5V, making it ideal for connecting two circuits of different voltages. In addition, the OCP-PCT218/E features a wide dynamic transmission range from 0.01lux to 1000lux, which makes it usable even in dark environments. Furthermore, the optoisolator is rated for a maximum output current of 500mA, a maximum collector-emitter voltage of 50V, and a maximum power dissipation of 750mW.
The OCP-PCT218/E is suitable for many applications, such as in low-voltage and low-power circuits, logic signals, timers, and digital controllers. It is also used in consumer electronics, smart meters, automotive electronics, communication systems, industrial controls, and factory automation. The optoisolator is especially useful in applications where high voltage isolation and noise suppression are required.
The OCP-PCT218/E is an example of an optoisolator - transistor, photovoltaic output component that provides electrical isolation between circuits. It offers a wide range of input and output voltages, a wide dynamic transmission range, and a maximum output current of 500mA. It is well-suited for a variety of applications in many different industries, such as consumer electronics, smart meters, automotive electronics, communication systems, industrial controls, and factory automation. This optoisolator is a great choice for anyone looking for a reliable and cost-effective way to electrically isolate two circuits.
The specific data is subject to PDF, and the above content is for reference
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...