Allicdata Part #: | 67-1615-2-ND |
Manufacturer Part#: |
OCP-PCTB116/E-TR |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Lumex Opto/Components Inc. |
Short Description: | OPTOISO 5KV TRANS W/BASE 6SMD |
More Detail: | Optoisolator Transistor with Base Output 5000Vrms ... |
DataSheet: | OCP-PCTB116/E-TR Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Output Type: | Transistor with Base |
Supplier Device Package: | 6-SMD |
Package / Case: | 6-SMD, Gull Wing |
Mounting Type: | Surface Mount |
Operating Temperature: | -30°C ~ 100°C |
Vce Saturation (Max): | 300mV |
Current - DC Forward (If) (Max): | 50mA |
Voltage - Forward (Vf) (Typ): | 1.2V |
Current - Output / Channel: | 50mA |
Voltage - Output (Max): | 60V |
Series: | -- |
Input Type: | DC |
Rise / Fall Time (Typ): | 5µs, 4µs |
Turn On / Turn Off Time (Typ): | -- |
Current Transfer Ratio (Max): | 600% @ 2mA |
Current Transfer Ratio (Min): | 60% @ 2mA |
Voltage - Isolation: | 5000Vrms |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators, also known as optocouplers, are devices used for electrical isolation. They provide a high degree of electrical separation between the input and output by using a light beam to transport the signal. The OCP-PCTB116/E-TR is a 4 Pin, Transistor, Photovoltaic Output Optoisolator.
The OCP-PCTB116/E-TR optoisolator consists of a gallium arsenide infra-red LED (Light Emitting Diode) and a silicon NPN phototransistor. When activated, the LED transistor emits a light beam that switches on and off the corresponding NPN phototransistor. Connections to the PCB board (Printed Circuit Board) are in a 28DIP (dual in-line package).
This optoisolator is used in applications such as printer control boards and power controllers, motor control circuits, security systems, industrial and consumer communication, automotive controllers, pulse transformers and digital displays. It is also used in medical diagnostics, solid-state relays, modems and industrial CCTV. The optoisolator is widely used in the industrial sector and in home automation systems.
The OCP-PCTB116/E-TR has a maximum electrical isolation voltage of 8kV which makes it suitable for applications that require very high levels of isolation between the input and output. It can be used in circuits with a wide range of power supplies, and it can operate from a wide range of supply voltages. The LED can handle up to a peak current of 20mA.
The working principle of this optoisolator is based on the phenomenon of photoelectric effect. It works by passing a beam of light from the LED to the output transistor which is switched on and off by the light signal. This creates an electrical signal that is sent to the output. The LED used in this optoisolator has a reverse voltage of 5V and a forward voltage of 1.2V. The output transistor has an on/off gain of between 100 and 1000.
The OCP-PCTB116/E-TR optoisolator is a reliable device that provides electrical isolation and protection in difficult environments. It is a cost-effective solution for applications that require electrical isolation, such as in industrial and consumer electronics. The optoisolator can also be used in motor control circuits that need to switch high currents. It has a compact design and a low cost, making it an attractive choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...