OKL-T/6-W12P-C Power Supplies - Board Mount

DC-DC converters are usually used to provide a regulated high-voltage DC output from a low-voltage DC input. The OKL-T/6-W12P-C DC-DC converter is no exception. It does this by taking a 12-volt to 24-volt DC input and providing a regulated 24-volt DC output. This converter is designed for harsh environment applications, such as those in factories and vehicles.

The OKL-T/6-W12P-C comprises a metal shielded housing containing a power transformer, 3-terminal full-wave rectifier bridge, a capacitor filter, as well as other components. The power transformer helps to step down the incoming dc voltage, and the rectifier bridge converts it to pulsating dc. The capacitor filter smooths out this pulsating dc into a clean dc output.

The rate at which the OKL-T/6-W12P-C can send power to its load is determined by its rated current. For a standard 7A OKL-T/6-W12P-C unit, the maximum voltage under no-load conditions is 24V with an efficiency of 93 percent. This device can deliver up to 6A of regulation for up to 10A on its output at a maximum voltage of 24V.

In order to protect the device against overload, the OKL-T/6-W12P-C is designed with an internal over–current detector which, when the current exceeds the rated current value, will send a signal to shut off the converter. This will prevent it from being damaged from excess current. If this happens, the device must be reset by turning it off and then back on again.

The OKL-T/6-W12P-C DC-DC converter is designed to provide a robust and reliable solution for applications that need a clean and regulated power output from a lower voltage input. It is typically used in factory machinery, automotive, lighting, and other harsh environment applications. Its internal protection against overloads, as well as its 94 percent efficiency, ensures that it can continue to provide reliable power output for long periods of time.