ORNTV10022002UF

Number of Pins:	8
Height - Seated (Max):	0.068" (1.73mm)
Size / Dimension:	0.194" L x 0.157" W (4.93mm x 3.99mm)
Supplier Device Package:	--
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Applications:	Voltage Divider (TCR Matched)
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±25ppm/°C
Power Per Element:	100mW
Series:	ORNV
Resistor-Ratio-Drift:	±5 ppm/°C
Resistor Matching Ratio:	±0.05%
Number of Resistors:	5
Tolerance:	±0.1%
Resistance (Ohms):	10k, 20k
Circuit Type:	Voltage Divider
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ORNTV10022002UF application field and working principle are key aspects of Resistor Networks, Arrays. Resistor networks are used to divide a single electrical current or voltage into multiple outputs or components. The resistor networks are generally constructed as an array of resistors arranged in a specific circuit configuration in order to accomplish this.Resistor networks can be fabricated using either discrete components or integrated circuits (ICs). Discrete resistor networks are constructed using individual resistor elements and are connected together in the desired circuit configuration. In contrast, IC-based resistor networks are fabricated entirely within a single die. This is advantageous because it increases the space efficiency of the network and allows for higher switching frequencies and the incorporation of advanced features such as filters and amplifiers. The ORNTV10022002UF is a high speed signal switch with high linearity. It has 4 SP8T switches in a 28-pin SSOP package. This configuration results in a 4-input 8-output switching Mux with an analog output. The switch is a key component in phased-array antenna systems, receivers, and variable signal gain/attenuation applications. The ORNTV10022002UF utilizes a resistor network consisting of two 1/4W 5% WN500 ohm resistors. The two resistors provide an off/on switch control of the output signal. The resistor network is constructed physically out of two separate resistors, but they are electrically equivalent to a single resistor of WN250 ohms. This is because they are connected in parallel, forming a single resistor of WN500 ohms.When the switch is off, the current flow is no longer moving through the resistor, allowing the output voltage to remain the same as the input voltage. When the switch is on, the resistor divides the input current into multiple outputs, providing multiple outputs of equal parts of the input current. As a result, the output voltage will be proportional to the input voltage. The ORNTV10022002UF is a general purpose device and can be used for various types of applications. For example, it can be used to divide a single input voltage into multiple outputs of equal parts to provide very precise load distribution. It can also be used to provide signal attenuation, allowing for more control over the output signal. It is also suitable for applications such as differential line drivers, providing low noise with low crosstalk.In conclusion, the ORNTV10022002UF is a high-speed signal switch with high linearity and can be used in resistor networks and arrays to divide a single electrical current or voltage into multiple outputs or components. By utilizing a resistor network, the ORNTV10022002UF can be used for various types of applications, including load distribution, signal attenuation, and differential line drivers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description