P1330-104J

DC Resistance (DCR):	1.68 Ohm Max
Height - Seated (Max):	0.145" (3.68mm)
Size / Dimension:	0.325" L x 0.125" W (8.26mm x 3.18mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	1kHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	P1330
Shielding:	Unshielded
Current - Saturation:	132mA
Current Rating:	347mA
Tolerance:	±5%
Inductance:	100µH
Material - Core:	Ferrite
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Fixed Inductors

The P1330-104J fixed inductor is a type of electronic component used to create an inductor in a variety of applications. The P1330-104J is classified as an axial leaded fixed inductor, which is commonly found in many commercial and industrial applications.In general, an inductor is an electronic component that is constructed from a conducting material such as copper and wound with wire to create magnetic flux. Inductors are used in a variety of circuits, including power supplies, filters, and antennas. Fixed inductors, such as the P1330-104J, are a type of inductor that utilize a fixed number of strands of wire to create a fixed amount of inductance.The P1330-104J is a type of axial leaded fixed inductor. This type of inductor requires a number of strands of wire to be wrapped around a ferrite core. The ferrite core acts as a medium for the current to flow through, while the strands of wire act as inductors to create the inductance. The leads of the P1330-104J are made of steel and are connected to the inductor at the ends of the ferrite core.The P1330-104J is designed to operate in a frequency range of 10kHz-100MHz and has a self-resonant frequency of 150MHz. It also has a rated inductance of 10uh and is capable of withstanding voltages of up to 20V. The P1330-104J is ideal for use in many applications, including switching power supplies, antenna circuits, and high-frequency filters.The working principle of the P1330-104J is fairly simple. When a current is introduced to the inductor, a magnetic field is created due to the winding of the wire, which then acts on the ferrite core and modifies the inductance of the component. The inductance of the component is dependent on the number of strands of wire and the size of the ferrite core.In summary, the P1330-104J is an axial leaded fixed inductor, designed for use in a wide range of applications. It has an operating frequency of 10kHz-100MHz, rated inductance of 10uh, and can withstand up to 20V of current. The working principle of the P1330-104J is based on the winding of the wire to produce a magnetic field, which then interacts with the ferrite core to modify the inductance of the component.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description