P160-153HS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, such as the P160-153HS, are components that store energy in an electric field as a result of their construction. A typical inductor consists of a core, which can be either a soft iron, ferrite, or similar material, and a wire winding wound around it. When electrical current passes through the wire, it creates a magnetic flux within the core material which stores the energy.As the name implies, fixed inductors contain a fixed number of turns in the wire windings. This allows the inductor to be accurately tuned for a given application. They are most often used in applications such as filter circuits or radio antennas to pass or block certain frequencies.The P160-153HS is a fixed inductor that operates at a frequency range of 10 kHz to 500 MHz. It has a maximum current rating of 3.5 Amps and a rated Volt-Amp value of 27.5. It has a full tesla rating of 0.0133 Tesla. This component has an impedance of 3.5 Ohms and a Q factor of 7.7. The operating temperature range is -40 to +85°C while the storage temperature range is -55 to +125°C.The P160-153HS is typically used in radio antennas and receiver designs. Radio antennas need inductors in order to trap the desired frequency and amplitude. Inductors within a receiver help tune receivers to the desired frequency and selectively filter out unwanted signals. This inductor is also useful in other types of RF and microwave circuits including filters, oscillators, and amplifiers.When used in a wireless network, the P160-153HS can provide an improved signal quality. This is because it helps reduce the signal’s distortion by increasing the signal’s impedance and Q factor, which helps improve the signal-to-noise ratio. Additionally, it helps reduce the system’s power consumption, as it limits current flow.In conclusion, the P160-153HS is a fixed inductor that is capable of operating at a high frequency range. It helps improve the signal quality in wireless networks by increasing impedance and Q factor, while also reducing power consumption. As such, it is a useful component for a variety of radio and microwave circuits, as well as antennas and receivers.

The specific data is subject to PDF, and the above content is for reference