PA01S2415A

Current - Output (Max):	67mA
Size / Dimension:	0.45" L x 0.24" W x 0.39" H (11.5mm x 6.0mm x 10.0mm)
Package / Case:	4-SIP Module
Mounting Type:	Through Hole
Efficiency:	79%
Operating Temperature:	-40°C ~ 85°C
Features:	SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	1kV
Power (Watts):	1W
Series:	PA01S
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	15V
Voltage - Input (Max):	26.4V
Voltage - Input (Min):	21.6V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are electronic devices which convert a direct current (DC) input source into a DC output source at a different voltage level. These devices are used for a variety of applications such as powering small electronics from a 12V battery, providing a 5V supply for USB ports and other interface standards, and step-up or step-down of power levels. In addition, DC-DC converters can also be used to reduce the amount of power dissipation on high voltage rails.The PA01S2415A is a DC-DC converter designed to take an input voltage of 24V and convert it to an adjustable output voltage of between 5.7V and 23V. It is a highly efficient component with a maximum efficiency of 95%, and is capable of supplying up to 15A of output current. The device is capable of providing up to 60W of output power and is protected against overcurrent, thermal shutdown, and short circuit conditions.The PA01S2415A employs a single-ended forward voltage conversion topology with an internal synchronous rectifier. It has a basic two-stage switch-mode operation which consists of a high frequency switch and a low frequency PWM (Pulse Width Modulation) controller. The high frequency switch is the main control module for DC-DC converters. It works by controlling the input voltage and regulating the output voltage by pulse width modulation. The output voltage is controlled by the duty cycle of the switch, in which the duration of the pulse is proportional to the output voltage.The low frequency PWM controller is responsible for controlling the duty cycle of the high frequency switch. It operates at a much lower frequency than the switch, typically in the range of a few hundred kHz. It compares the input voltage and the output voltage to maintain the desired output voltage. If the output voltage is higher than the desired voltage, the duty cycle will be reduced, and vice versa.One of the main advantages of the PA01S2415A is the adjustable output voltage which can be used to customize the power supply depending on the application. This allows designers to fine-tune the performance of the power supply for different applications, such as powering microprocessors or supplying voltage to various interface standards.The PA01S2415A is an efficient device and can be used in a variety of applications. It is ideal for building stability into sensitive electronics, such as telecommunications equipment, as well as in computers and consumer electronics. It is a reliable, efficient, and cost-effective choice for any application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description