PC81106NSZ0F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices which send an electrical signal over an insulation layer. They have many applications but are mainly used to electrically isolate two sides of a control system by utilizing the output devices below the main insulation layer. The PC81106NSZ0F is a transistor photovoltaic output optoisolator. It offers high immunity from electrical noise and efficient output isolation. It is designed for use in applications such as industrial automation, security systems, and process control.

The PC81106NSZ0F has a maximum input rating of 50 mA with a typical forward current transfer ratio of around 50%. This optoisolator consists of an infrared LED and a phototransistor in a molded plastic housing. The LED improves the efficiency of the optoisolator for applications requiring higher output current and LED current is typically at or below 10 mA. A connection to a regulator is provided so that the light from the LED can be monitored, and the LED current can be varied accordingly.

The output of the PC81106NSZ0F is a phototransistor which offers high current gain and has a high input impedance. It has a maximum voltage rating of 24 VDC and a typical response time of 2 mS, making it suitable for fast switching applications. The LED typically has a maximum junction temperature of 150°C (302°F) and an operating wavelength range of approximately 850 nm. It is rated for a maximum power dissipation of 0.75 W.

The PC81106NSZ0F has a wide range of applications. It is commonly used to provide output isolation in commercial and industrial applications. It is capable of switching high voltage and current signals quickly and accurately for process control, safety systems and industrial automation. It is also ideal for applications in the medical industry, providing accurate and reliable measurement and other signals.

The PC81106NSZ0F works by transmitting an electrical signal through an insulation layer. The LED generates a light signal which activates a phototransistor at the output. The phototransistor amplifies the signal and it is sent to the load. The insulation layer acts as a barrier and provides electrical isolation between the input and output of the device. This prevents noise interference and protects the load from any fault or external event.

The PC81106NSZ0F is a reliable and efficient optoisolator designed for a variety of applications. It offers high current transfer ratio, immunity to electrical noise and a wide operating wavelength range. The insulation layer eliminates any potential interference and the versatile output provides accurate and reliable measurements and signals. The PC81106NSZ0F is a great solution for applications requiring isolation and fast switching of electrical signals.

The specific data is subject to PDF, and the above content is for reference