
Allicdata Part #: | 696-1796-5-ND |
Manufacturer Part#: |
PCS-0R0047D1 |
Price: | $ 15.08 |
Product Category: | Resistors |
Manufacturer: | Riedon |
Short Description: | PCS 0.0047 OHM 0.5% 10PPM |
More Detail: | 4.7 mOhms ±0.5% 40W Through Hole Resistor 4-SIP Cu... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | $ 13.70700 |
10 +: | $ 11.97720 |
25 +: | $ 10.82270 |
50 +: | $ 10.28150 |
100 +: | $ 9.92075 |
250 +: | $ 9.37960 |
Series: | PCS |
Packaging: | Tube |
Part Status: | Active |
Resistance: | 4.7 mOhms |
Tolerance: | ±0.5% |
Power (Watts): | 40W |
Composition: | Metal Foil |
Features: | Current Sense |
Temperature Coefficient: | ±10ppm/°C |
Operating Temperature: | -40°C ~ 130°C |
Package / Case: | 4-SIP |
Supplier Device Package: | Radial Lead |
Size / Dimension: | 0.878" L x 0.177" W (22.30mm x 4.50mm) |
Height - Seated (Max): | 0.687" (17.45mm) |
Number of Terminations: | 4 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
PCS-0R0047D1 through hole resistors are commonly used in electrical and electronic circuits to reduce the voltage and signal levels. They are available in a number of different configurations based on the number of resistors and their size. The most common type of through hole resistor is the four-terminal type. It has four terminals (A, B, C, and D) which are connected in series. The A and B terminals are the input terminals, while C and D are the output terminals. The resistance between the two terminals (A and B) is usually determined by the size of the resistor.
The working principle of PCS-0R0047D1 through hole resistors is based on the Ohm\'s law. According to this law, the voltage (V) across the terminals of a resistor is proportional to the current (I) through it. Thus, if the current increases, the voltage across the resistor also increases. Similarly, if the current decreases, the voltage across the resistor also decreases. This voltage-current relationship is the basis for the resistor\'s working principle.
The applications of PCS-0R0047D1 through hole resistors are numerous. For example, they can be used to limit the current through an electrical circuit to prevent it from overloading. They can also be used as voltage dividers to reduce the amount of current in a circuit. Furthermore, they can be used to create differential amplifiers, which can detect small differences in voltage between two points. They can also be used in power supplies to regulate the current that flows through them. Additionally, they can be used to control the speed of a motor or to provide a stable voltage to a device.
PCS-0R0047D1 through hole resistors are generally cost-effective and highly reliable as they are manufactured using high-quality materials such as copper, tantalum, or nickel. They are also designed to handle a variety of conditions, such as temperature variations, vibration, and humidity. Furthermore, they can provide a variety of resistance values over a wide temperature range.
In conclusion, PCS-0R0047D1 through hole resistors are an important component in many electrical and electronic circuits. Their working principle is based on Ohm\'s law and they are available in various configurations and sizes. In addition, they are both cost-effective and reliable, and can handle a variety of conditions. Because of these features, through hole resistors are widely used in a variety of applications, from limiting current and regulating voltage to controlling motor speed and providing a stable voltage to a device.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...

RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...

RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...

RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...

RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...

RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...
