PDB12-H4201-203BF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary potentiometers and rheostats are two types of electrical resistors that can be found in a number of applications. They are both used to adjust the resistance of a circuit, and they are often found in the same circuits.

A rotary potentiometer, also known as a variable resistor, is an electrical component with a resistive element that can be adjusted to vary the resistance of a circuit. These devices are available in a number of form factors, including center-tapped and multi-turn types. The most common form of rotary potentiometer is the single-turn type, which commonly has three terminal pins. The center pin is the wiper, and the other two pins are the ends of the resistive element. By turning the knob, the resistance of the device can be adjusted.

Rheostats are a type of variable resistor that can only resist a fixed amount of current. These devices are mainly used as dimmers, in fans, and other applications that require smoothing out large changes in voltage or current. Rheostats are also frequently used as voltage controllers. They are typically built using two resistive elements with a sliding contact in-between. By adjusting the position of the sliding contact, the resistance of the device can be varied from zero to the maximum value.

The PDB12-H4201-203BF is a rotary potentiometer. This device contains a single-turn potentiometer with a built-in three-pole circuit board. The three-pole circuit board allows the connection of additional components, such as microswitches or additional resistors. The device features a three-terminal configuration, with a center wiper, and two end terminals for resistance adjustment.

The PDB12-H4201-203BF can be used in a wide variety of applications, including noise reduction, controlling the speed of motors, adjusting volume on audio equipment, and setting dimming levels in lighting applications. In addition, this device can also be used in applications where it is necessary to adjust the resistance of the circuit. Thanks to its three-pole circuit board, the PDB12-H4201-203BF can be used to create adjustable voltage dividers, variable gain amplifiers, and other applications.

The working principle of the PDB12-H4201-203BF is based on the variable resistance principle. The resistance of the device is adjusted by turning the control knob. This knob is connected to a wiper arm, which is in contact with the resistive element. When the knob is turned, the wiper arm is moved, which changes the amount of the resistance that is applied to the circuit. The amount of resistance is determined by the position of the wiper arm within the resistive element.

In conclusion, the PDB12-H4201-203BF is a rotary potentiometer that can be used in a range of applications. It is based on the variable resistance principle and can be used to adjust the resistance of a circuit. It is often used in noise reduction and setting dimming levels in lighting applications, as well as in applications that require adjusting voltage dividers and variable gain amplifiers.

The specific data is subject to PDF, and the above content is for reference