PDB182-K230K-104B

Temperature Coefficient:	--
Mounting Type:	Panel Mount
Bushing Thread:	M7 x 0.75
Actuator Diameter:	0.236" (6.00mm)
Actuator Length:	1.181" (30.00mm)
Actuator Type:	Knurled and Slotted
Termination Style:	PC Pins
Resistive Material:	Carbon
Adjustment Type:	Side Adjustment
Rotation:	300°
Number of Turns:	1
Series:	Pro Audio PDB18
Power (Watts):	0.125W, 1/8W
Built in Switch:	Detent
Number of Gangs:	2
Tolerance:	±20%
Resistance (Ohms):	100k
Taper:	Linear
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary Potentiometers, Rheostats

Rotary potentiometers, rheostats, and applications such as PDB182-K230K-104B (henceforth referred to as K230K) are used to control the voltage or current levels in various applications, ranging from basic household applications to more sophisticated industrial devices. K230K, for example, can be found in different types of digital control systems, such as motion controls in robots or automated systems. Additionally, it is commonly used as one of the components in medical imaging equipment where accurate motion control is required. K230K can also be used to control electrical current via a process known as pulse width modulation (PWM). In this process, a constant, low-power electrical current is changed rapidly in width and frequency, producing a varying, total current. K230K is used to set the total current created in this manner without creating any significant losses of energy.To understand the working principle of K230K, it is necessary to take a look at the devices that comprise it. K230K consists of two main components: the rotary base and the wiper. The rotary base consists of three concentric terminals, the first of which is the central terminal which is connected to an external voltage or current source. The other two terminals are the movable sliding contact terminals, referred to as wipers, which move along the resistance track. When the rotary component is activated, the wipers move along the resistance track, creating a certain total resistance. By setting the current through the K230K, the voltage or current levels can be controlled. This is done in such a way as to minimize energy loss while still achieving the desired current levels. It is important to note that while the construction and working principle of K230K are similar in most other types of potentiometers and rheostats, it is not interchangeable with other devices due to its specific design and operating mechanism. K230K is designed to operate at a specified operating voltage, and has a limited current capacity. Therefore, a device with the same construction may not work correctly in a different application, as it may not have the correct operating voltage or current capacity. Furthermore, K230K is not designed to produce precise output, which is why it is not typically used in applications where constant and accurately measured output is required. Instead, it is used for applications such as boosting the output of a power supply.K230K is also used in some industrial control systems, such as when controlling different types of motors or when limiting the current and/or voltage of generators. Additionally, K230K is used in communication systems such as modems to provide the correct signal levels, and can be found in a wide variety of electronic systems, ranging from signaling systems to computers. To put it simply, K230K is used to control the voltage or current levels in a variety of electronic applications. By using its rotary components, and other components such as the wiper, it is able to produce a constant low power output or, depending on its design, to produce more precise outputs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description