PE-01005FB121ST Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite beads and chips, such as the PE-01005FB121ST, are used to help suppress electronic interference or improve signal isolation. The applications mainly lie in communication technology, information technology, and consumer electronics. The PE-01005FB121ST helps manage the signal process by filtering out any interference, allowing for better functionality.

Ferrite materials are composed of iron oxides with different amounts of other chemical substances, which form a two-phase structure. The particles of the phases are tiny, measuring between 0.5 and 10 nanometers (nm). Magnetic properties are secured in the nanoscale, producing a cross-linked structure. This structure has a higher impedance than copper, and when placed on a circuit path, it can diminish the AC current. Ferrite beads that are placed on inductive components also cause impedance, which helps reduce circuit clunks.

The PE-01005FB121ST has an inductance of 1 µH, with an impedance of 100 to 1000 mΩ, and a rated current of 50mA. It is a small size chip ferrite bead that has two bonding pads, which are identified as the top and bottom side. There is also a spiral wire wound around the ferrite bead core, which enables the current to be well distributed. The chip bead is applied to the circuit board by a soldering method, and can be connected to other components through wire soldering and conductive adhesive. It is designed to act as a filter, helping reduce any interference in frequencies ranging from 10 MHz to 1 GHz.

The working principle is based on the idea that the signal passing through the PE-01005FB121ST is blocked from the electrical components, thus interfering noise is eliminated. The current winding around the ferrite core causes a variation in the magnetic flux,which changes according to the signal\'s frequency and amplitude. This variation in magnetic flux produces an alternating current in the surrounding area, creating a shield. As the current passes through the microphone, its frequency and amplitude is filtered, reducing any interference caused by other voltage spikes. It is important to test the bead with an oscilloscope, to make sure that the signal is not distorted.

The PE-01005FB121ST chip ferrite bead is specifically designed to eliminate interference and improve signal isolation in the applications of communication technology, information technology, and consumer electronics. With its small size, it can be used in circuits with a limited amount of space and can offer great filtering performance with an impedance of 100 to 1000 mΩ. The chip bead is easy to install, and once installed, it will improve signal performance and reduce noise.

The specific data is subject to PDF, and the above content is for reference