PE-0201CC1N0STT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electronic components designed to provide a specific amount of inductance in an electrical circuit. They are commonly used to dampen electrical signals and filter out unwanted frequencies. The PE-0201CC1N0STT inductor is a surface-mount component designed for high-frequency applications. It can operate up to a maximum frequency of 10GHz and provides an inductance of 0.33 microhenry.

This inductor is made up of a core wrapped in ferrite tape. The core is formed in the shape of a spiral and is composed of an iron-silicon alloy. The coil is then wound around this core using a high-temperature wire with a diameter of 0.2mm. The number of turns depends on the inductance required and typically ranges from five to twenty turns.

To function correctly, the PE-0201CC1N0STT requires an appropriate voltage and current. In order to keep losses to a minimum, the component is designed to handle only very low current levels. The tape is kept tight around the core to ensure maximum coupling and reduce leakage. This helps to keep the inductance as close to the desired value as possible.

The PE-0201CC1N0STT is commonly used in voltage-controlled oscillators (VCOs). These are circuits that allow the frequency of an oscillating signal to be controlled by changing the voltage level. By coupling the VCO with the PE-0201CC1N0STT inductor, the frequency of the signal can be set to a specific value. This can be used in a variety of applications, such as radio receivers, digital clocks, and various types of sensors.

The component is also used to filter out unwanted high-frequency signals. By coupling it with a capacitor, the inductor can form a high-pass filter. This will allow only signals above a certain frequency to pass through while blocking out those below the cutoff frequency. This can be useful in applications such as audio systems, two-way radios, and wireless communications.

In conclusion, the PE-0201CC1N0STT fixed inductor is a component designed for high-frequency applications. It provides an inductance of 0.33 microhenry and can be used in VCOs as well as for filtering out unwanted high-frequency signals. This makes it a versatile component with a wide range of applications.

The specific data is subject to PDF, and the above content is for reference