
Allicdata Part #: | 553-3376-2-ND |
Manufacturer Part#: |
PE-0201MCMC900ST |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | Pulse Electronics Network |
Short Description: | CMC 50MA 2LN 90 OHM SMD |
More Detail: | 2 Line Common Mode Choke Surface Mount 90 Ohms @ 1... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage Rating - AC: | -- |
Package / Case: | 0201 (0603 Metric) |
Height (Max): | 0.014" (0.35mm) |
Size / Dimension: | 0.026" L x 0.020" W (0.65mm x 0.50mm) |
Mounting Type: | Surface Mount |
Features: | -- |
Approvals: | -- |
Ratings: | -- |
Operating Temperature: | -40°C ~ 85°C |
Series: | 0201 |
Voltage Rating - DC: | 5V |
DC Resistance (DCR) (Max): | 6.5 Ohm |
Current Rating (Max): | 50mA |
Impedance @ Frequency: | 90 Ohms @ 100MHz |
Number of Lines: | 2 |
Filter Type: | Signal Line |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common Mode Chokes are inductors designed to limit conducted EMI while allowing normal AC or DC signals to pass. The PE-0201MCMC900ST is a Common Mode Choke specifically designed for automotive applications. It is rated at 9A and its operating temperature range is -40°C to +125°C. It is made using high temperature polypropylene dielectric film and provides high common mode impedance across a wide frequency range.
The primary purpose of the PE-0201MCMC900ST is to reduce the Electromagnetic Interference (EMI) that is conducted along signal lines. It works by limiting the conducted differential mode current while allowing normal AC or DC signals to pass. This is done by connecting two inductors in a series circuit with opposite windings in which the opposing currents create a cancellation or “bucking” effect that dampens the conducted EMI signal.
The PE-0201MCMC900ST should be installed in the signal line as close as possible to the source of the EMI in order to be most effective. The choke should be installed in the same orientation as the signal line so that the differential mode current is directed through the choke in the same direction. In addition, the choke should be installed with a low-impedance ground, such as the device’s chassis, in order to minimize the amount of EMI that bypasses the choke.
The PE-0201MCMC900ST is an effective and reliable solution for reducing conducted EMI in automotive applications. The choke can tolerate a wide range of temperature and current, and it is designed to provide high common mode impedance across a wide frequency range. It is easy to install and does not require any special tools or equipment. It is a cost effective solution to reduce EMI in automotive applications and should be considered when designing a system that is sensitive to EMI.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...

COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...

CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...

COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...

COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...

COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...
