| Allicdata Part #: | PE-0805CCMC900STH-ND |
| Manufacturer Part#: |
PE-0805CCMC900STH |
| Price: | $ 0.00 |
| Product Category: | Filters |
| Manufacturer: | Pulse Electronics Network |
| Short Description: | CMC 300MA 2LN 90 OHM SMD |
| More Detail: | 2 Line Common Mode Choke Surface Mount 90 Ohms @ 1... |
| DataSheet: |  PE-0805CCMC900STH Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Voltage Rating - AC: | -- |
| Package / Case: | Horizontal, 4 PC Pad |
| Height (Max): | 0.043" (1.10mm) |
| Size / Dimension: | 0.087" L x 0.051" W (2.20mm x 1.30mm) |
| Mounting Type: | Surface Mount |
| Features: | -- |
| Approvals: | -- |
| Ratings: | -- |
| Operating Temperature: | -- |
| Series: | ChipChoke™ CCMC |
| Voltage Rating - DC: | 50V |
| DC Resistance (DCR) (Max): | 400 mOhm |
| Current Rating (Max): | 300mA |
| Impedance @ Frequency: | 90 Ohms @ 100MHz |
| Number of Lines: | 2 |
| Filter Type: | Signal Line |
| Part Status: | Active |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common Mode Chokes, also called inductors or transformers, are commonly used in electronic circuits where high-frequency interference needs to be blocked or, alternatively, where low-frequency signals need to be passed through while high-frequency noise is filtered. The PE-0805CCMC900STH is a Common Mode Choke used for power supply filtering, and also in EMI filtering & suppression applications.
The PE-0805CCMC900STH contains dual-layer windings which are encapsulated in a ferrite material. This ferrite material is important because it\'s used to absorb the unwanted high-frequency noise, while allowing low-frequency signals to pass through. The winding material further helps in reducing the physical size of the component, and also improves its electrical performance. Its rated current is up to 900mA, while its inductance ranges from 1.65nH to 80nH.
The working principle of the PE-0805CCMC900STH is based on the fact that it filters out both high-frequency and low-frequency signals. This is done by the dual-layer windings which help in absorbing the unwanted high-frequency noise, and allow the low-frequency signals to pass through. Additionally, the ferrite material helps to block out any high-frequency signals, while allowing only low-frequency signals to pass through.
The PE-0805CCMC900STH can be used in a variety of applications, such as power supply filtering, power line conditioning, EMI/RFI suppression, and more. It can also be used in various systems where power quality is of utmost importance. Additionally, it can be used for audio applications as well, such as reducing noise in the audio signal path.
In summary, the PE-0805CCMC900STH is a Common Mode Choke that is widely used in power supply filtering, EMI filtering and suppression, power line conditioning, and more. It is able to filter out high-frequency noise, while allowing low-frequency signals to pass through, thanks to its dual-layer windings and ferrite materials, allowing it to be used in a variety of applications where power quality is of utmost importance.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...