PE-53630NLT Inductors, Coils, Chokes

DC Resistance (DCR):	11 mOhm Max
Height - Seated (Max):	0.270" (6.86mm)
Size / Dimension:	0.340" L x 0.340" W (8.64mm x 8.64mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Features:	--
Operating Temperature:	-40°C ~ 130°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	SLIC
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	3.4A
Tolerance:	--
Inductance:	1.01µH
Material - Core:	--
Type:	Toroidal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
Fixed Inductors are one type of passive electrical components, which are specially designed to generate and store energy in the form of a magnetic field.PE-53630NLT is a fixed inductor developed by Power Magnetics. This article will mainly discuss the application field and working principle of PE-53630NLT.
Application Field and Uses
PE-53630NLT is widely used in various industries due to its small size, low cost, and high operating efficiency. Most applications involve either power switching or signal processing. For either application, the PE-53630NLT helps to reduce stress on the circuit while enhancing its dynamic range. It is often times used in different types of network communications systems such as Ethernet, Wi-Fi, and cellular networks. It is also used in major industrial equipment such as measurement and calibration devices, and is a popular choice for measure and modify alternating current signals. When used in switching, it helps to control current and voltage and reduce heat, by allowing for higher switching speeds due to its lower inductance.
Working Principle
PE-53630NTL is a fixed inductor, so it has a core made of soft ferrite material that is wound with many turns of fine wire. This wire acts as an electrical conductor and is usually made from copper. The number of turns and the thickness of the wire determine the inductance of the device. When an alternating current flows through the conductor, a magnetic field is created around it. This magnetic field is proportional to the current, and as the current increases, the inductance also increases. The inductance can be tuned by adjusting the number of turns and the thickness of the wire, allowing the inductor to perform different functions according to its application. Additionally, PE-53630NLT has a large current capacity of up to 10 A and can operate up to 30MHz.
Conclusion
PE-53630NLT is a fixed inductor designed by Power Magnetics. It is used in various industries and in a variety of applications including power switching, signal processing, network communications, and major industrial equipment. It has small size, low cost and high operating efficiency. The working principle is that it has a core made of soft ferrite material that is wound with many turns of fine wire, and the inductance is tuned by adjusting the number of turns and the thickness of the wire. It has a large current capacity of up to 10 A and can operate up to 30MHz.

The specific data is subject to PDF, and the above content is for reference