PE-62912NL Filters

Series:	--
Packaging:	Tray
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Filter Type:	--
Number of Lines:	2
Inductance @ Frequency:	3mH @ 1kHz
Current Rating (Max):	3.5A
DC Resistance (DCR) (Max):	60 mOhm
Voltage Rating - DC:	--
Voltage Rating - AC:	--
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Approvals:	--
Features:	--
Mounting Type:	Through Hole
Size / Dimension:	1.150" L x 0.560" W (29.21mm x 14.22mm)
Height (Max):	1.160" (29.46mm)
Package / Case:	Vertical, 4 PC Pin

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes are inductors or transformers that are designed to block the flow of high-frequency currents from a power supply while allowing the DC component to flow uninterrupted. PE-62912NL belongs to this particular category of electronic components. It is a type of three wire common mode choke composed of three windings and two pieces of 50mH integrated ferrite cores. This application field can be found in Automatic Test Equipment (ATE).The main purpose of using PE-62912NL is to reduce electromagnetic interference (EMI) when connecting power supplies to ATE. This helps to prevent ATE from emitting unwanted signals that can interfere with other equipment. The PE-62912NL also helps protect ATE from receiving interference from external sources. This is especially important in environments where several pieces of electrical equipment are operating in close proximity.The working principle behind PE-62912NL is based on the Faraday shield effect which uses the magnetic field generated by the inductor to block electromagnetic interference. The Faraday shield effect is achieved by the choke winding connected to the source, which induces a magnetic field. This magnetic field will then block out the EMI from the external source. The PE-62912NL will also act as a low-pass filter. This will limit the amount of high-frequency signals that are allowed to pass through, thus reducing EMI from the ATE that would normally be emitted.In conclusion, PE-62912NL is a three wire common mode choke designed for use in ATE. It is designed to reduce EMI both from the source as well as from external sources. It is based on the Faraday shield effect, which uses the magnetic field generated by the inductor to block EMI. The PE-62912NL also acts as a low-pass filter to limit the frequency of the signals that can be passed.

The specific data is subject to PDF, and the above content is for reference