Allicdata Part #: | 553-1738-ND |
Manufacturer Part#: |
PE-62916NL |
Price: | $ 5.70 |
Product Category: | Filters |
Manufacturer: | Pulse Electronics Power |
Short Description: | CMC 4MH 5.2A 2LN TH |
More Detail: | 4mH @ 1kHz 2 Line Common Mode Choke Through Hole ... |
DataSheet: | PE-62916NL Datasheet/PDF |
Quantity: | 91 |
1 +: | $ 5.17860 |
10 +: | $ 4.65948 |
100 +: | $ 3.31330 |
500 +: | $ 3.10622 |
1000 +: | $ 2.89913 |
Series: | -- |
Packaging: | Tray |
Part Status: | Active |
Filter Type: | -- |
Number of Lines: | 2 |
Inductance @ Frequency: | 4mH @ 1kHz |
Current Rating (Max): | 5.2A |
DC Resistance (DCR) (Max): | 40 mOhm |
Voltage Rating - DC: | -- |
Voltage Rating - AC: | -- |
Operating Temperature: | -40°C ~ 125°C |
Ratings: | -- |
Approvals: | -- |
Features: | -- |
Mounting Type: | Through Hole |
Size / Dimension: | 1.440" L x 0.800" W (36.58mm x 20.32mm) |
Height (Max): | 1.510" (38.35mm) |
Package / Case: | Vertical, 4 PC Pin |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common mode chokes, such as the PE-62916NL, are inductors specifically designed to reduce common mode noise in high frequency, high voltage applications. This type of noise is caused by the coupling of electrical noise onto a common connection, such as a power bus or ground. The PE-62916NL is designed to address common mode noise levels up to 10kHz.
The PE-62916NL consists of a single-turn coil with two separate windings on a high permeability ferrite core. The common connection of the windings is connected to the ferrite core, with the other two legs connected to the outer terminals. This structure creates two identical inductors, with each one connected in series with a capacitor and a ground connection. The addition of the capacitors allow for common-mode noise suppression at higher frequencies, since the capacitors increase the impedance of high frequency signals.
The PE-62916NL operates on the principle of differential-mode impedance. Since the two identical windings are connected in series with the two capacitors, any common-mode signals to be suppressed will flow through both the inductors and the capacitors. The impedance of the inductors will cause a voltage drop across each winding which is equal but opposite in phase. The combination of the inductors and the capacitors act like a short circuit, causing the common-mode voltage to reduce to near zero.
The PE-62916NL can be used in a variety of applications, including motor drive circuits, power inverters, and DC-DC converters. It can also be used as a stand-alone device or as part of a larger electromechanical system. In addition, the PE-62916NL can be used in automotive applications, especially those involving sensitive electronic systems which must be isolated from electrical noise. The PE-62916NL is also suitable for applications which require the reduction of power supply and ground noise.
The PE-62916NL is a cost-effective solution for suppressing common mode noise in high frequency, high voltage applications. Its simple design makes it an ideal choice for a variety of applications, and its robust construction ensures reliable and consistent performance. The PE-62916NL is an effective and cost efficient way to reduce the amount of electrical noise in any system.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...