Allicdata Part #: | PE-68002NL-ND |
Manufacturer Part#: |
PE-68002NL |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | Pulse Electronics Network |
Short Description: | COMMON MODE CHOKE 4LN TH |
More Detail: | 4 Line Common Mode Choke Through Hole DCR 350 mO... |
DataSheet: | PE-68002NL Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage Rating - AC: | -- |
Package / Case: | Vertical, 8 PC Pin |
Height (Max): | 0.300" (7.62mm) |
Size / Dimension: | 0.400" L x 0.400" W (10.16mm x 10.16mm) |
Mounting Type: | Through Hole |
Features: | -- |
Approvals: | -- |
Ratings: | -- |
Operating Temperature: | -- |
Series: | -- |
Voltage Rating - DC: | -- |
DC Resistance (DCR) (Max): | 350 mOhm |
Current Rating (Max): | -- |
Number of Lines: | 4 |
Filter Type: | Signal Line |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common Mode Chokes are commonly used for filtering applications to reduce noise in power supply lines. The PE-68002NL is one such example. It is a ferrite core common mode choke for EMI (electromagnetic interference) suppression in power supply lines. The PE-68002NL is a 1-element, single-phase, unshielded-type common mode choke.
The PE-68002NL is designed for use in DC power supply lines, such as printers, drives, power supplies, and instrumentation equipment, which require noise suppression and reduced radiation emissions. It is suitable for both coupling and decoupling applications; its use reduces the EMI emission and immunity levels, while providing high quality filtering characteristics.
The PE-68002NL has CTI (core-to-coil insulation) rating of 250Volts and UL94V-0 approval for up to 250VAC in air and 240VAC on a printed circuit board (PCB). Its low leakage inductance makes it suitable for applications requiring good power factor correction. The PE-68002NL also has a high current capacity of up to 12A and low DC resistance which makes it an ideal choice for power supply applications.
The PE-68002NL is a common mode choke with a three-construction type-eddy current suppression ferrite core. It works by suppressing EMI caused by both the electric and magnetic field, creating less noise interference. A common mode choke is made by putting two coils in adjacent core teeth. The E-field affects both coils, causing them to act as one coil, and is therefore moderated by the choke. The H-field (magnetic field) is moderated by the ferrite core, which acts as a shield that prevents the H-field from interacting with external equipment. The PE-68002NL common mode choke also has a high dielectric strength, which helps keep the performance of the signal interference-free.
In conclusion, the PE-68002NL common mode choke is an ideal choice for use in noise suppression and providing good power factor correction. It is suitable for applications requiring high voltage isolation between the coils or filtering of high frequency AC power lines. The PE-68002NL has a high current capacity and a low DC resistance, allowing for efficient noise suppression in a wide range of applications. It is UL94V-0 approved and meets the CTI (core-to-coil insulation) rating of 250VAC. The PE-68002NL is a valuable asset to any power supply line, as its use reduces noise interference and radiation emissions.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...