Allicdata Part #: | PE-96188NL-ND |
Manufacturer Part#: |
PE-96188NL |
Price: | $ 5.32 |
Product Category: | Filters |
Manufacturer: | Pulse Electronics Power |
Short Description: | COMMON MODE CHOKE 10A 2LN TH |
More Detail: | 2 Line Common Mode Choke Through Hole 10A (Typ) D... |
DataSheet: | PE-96188NL Datasheet/PDF |
Quantity: | 1000 |
210 +: | $ 4.83273 |
Voltage Rating - AC: | -- |
Package / Case: | Horizontal, 4 PC Pin |
Height (Max): | 1.030" (26.16mm) |
Size / Dimension: | 1.700" Dia (43.18mm) |
Mounting Type: | Through Hole |
Features: | -- |
Approvals: | -- |
Ratings: | -- |
Operating Temperature: | -40°C ~ 125°C |
Series: | -- |
Voltage Rating - DC: | -- |
DC Resistance (DCR) (Max): | 20 mOhm |
Current Rating (Max): | 10A (Typ) |
Number of Lines: | 2 |
Filter Type: | Power Line |
Part Status: | Active |
Packaging: | Tray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common Mode Chokes are a type of electrical filter which are used to suppress high-frequency electromagnetic interference and crosstalk, particularly in digital and mixed-signal systems. In some cases, they are used as a voltage divider between two high-voltage circuits, as in the case of the PE-96188NL.
The PE-96188NL is a type of high-power, single-channel common mode choke which is designed for automotive applications. It operates over an extended temperature range, from -40°C to +125°C, and is suitable for use in 12 V and 24 V systems. It has an integrated EMI filter for DC/DC matrix applications, and can be used to protect vehicle systems from EMI. The PE-96188NL has a built-in variable inductance which helps to provide a good common-mode rejection ratio, and has a maximum operating current of 30 A.
The working principle of the PE-96188NL is based on the principle of induction. It consists of two coils which are wound in opposite directions and placed in close proximity to each other. The two coils are connected to each other in series, so that current passing in one coil induces a magnetic field in the other coil, and vice versa. This magnetic field is able to filter out the unwanted electromagnetic interference, while allowing useful signals to pass through.
To ensure correct operation of the PE-96188NL, the current must be of the correct magnitude and frequency. If the current is too high, it can create an oscillating field in the coil, leading to instability in the device. If the current is too low, the device will become ineffective and may exhibit a higher common-mode rejection ratio than expected. The device is also sensitive to temperature variations, and should be positioned in an environment which has sufficient cooling.
In order to maintain optimal performance, the PE-96188NL should be regularly inspected and any faults identified and corrected as soon as possible. It is also important to ensure that it is correctly installed, with all components connected as per the manufacturer’s instructions. The device should also be shielded from direct sunlight and other sources of heat.
In conclusion, the PE-96188NL is a high-power, single-channel common-mode choke which is designed for automotive applications, and is suitable for use in 12 V and 24 V systems. It uses induction to filter out unwanted electromagnetic interference, while allowing useful signals to pass through. It is important to ensure that the device is correctly installed and regularly inspected to maintain optimal performance.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...