PEC11R-4025F-S0012

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders are digital devices used to convert mechanical motion into an electrical signal. The PEC11R-4025F-S0012 encoder is a rotary pulse encoder that can be used in a wide variety of applications. This device is a two-phase incremental encoder, and has a high sensitivity and reliable operation.

The PEC11R-4025F-S0012 encoder is primarily used in motion control applications, providing feedback on the motor\'s position, velocity, and acceleration. It has two channels that can be used to provide input to a motion controller, such as a speed or position servo system. This encoder uses a gap detection system to detect the edge of a flag or disk with the output pulse. When the flag or disk passes by the gap sensor, it is identified by the encoder and the two output signals are generated.

The two output signals from the PEC11R-4025F-S0012 are known as A and B, which are 90 degrees out of phase with one another. The A output determines the direction of rotation and the B output gives the angle of rotation. The two signals are combined to form a quadrature-encoded signal that can be used by the motion controller to determine the position of the motor.

The PEC11R-4025F-S0012 encoder can operate with an input voltage range of 2-12V DC and can read up to 2000 pulses per revolution (PPR). It has a maximum operating speed of 500rpm and a cable length of 1.5m. This encoder is a cost-effective solution for a wide variety of applications, including speed, position, and acceleration control.

The PEC11R-4025F-S0012 encoder works by detecting when a disk or flag passes the gap sensor and generating two output signals. The gap detector is set to the desired resolution, and when the disk passes the gap sensor, the encoder will generate two pulses 90 degrees out of phase with one another. These two pulses are used to form a quadrature-encoded signal that can be used by the motion controller to determine the position of the motor. This type of encoder is highly reliable and requires minimal maintenance, making it an ideal choice for most motion control applications.

The PEC11R-4025F-S0012 encoder is an inexpensive and reliable device that can be used in a variety of motion control applications. It has a high sensitivity and a long cable length, and is capable of reading up to 2000 pulses per revolution. This type of encoder is easy to install and requires minimal maintenance, making it a cost-effective solution for a wide range of motion control applications.

The specific data is subject to PDF, and the above content is for reference