PF2205-0R18F1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are one of the most common components used in both analog and digital electrical circuits. They are used to reduce the voltage and energy of a signal and to limit the amount of current that can flow through a circuit. PF2205-0R18F1 is an example of a Through Hole Resistor manufactured by Metreatronics Corporation. It is a radial lead fixed resistor with an 18 Ohm resistance at 25℃.

The PF2205-0R18F1 Through Hole Resistor is primarily used in telecommunications, telecommunications equipment, and consumer electronics. This type of resistor is typically used in applications where a low DC resistance is required, such as low-noise analog circuits, signal shielding, and in applied science experiments. The design of the resistor is very stable so it can be used in high-reliability applications.

The PF2205-0R18F1 Through Hole Resistor works via the mechanism of electrical resistance. This is the property of a material to oppose the flow of electric current. By passing a current through the resistor, some of the energy is converted into heat as it passes through the resistor, reducing the voltage and current. The amount of resistance of the resistor is dependent on the material used to make it; in this case the resistor is made from manganese-copper alloy that has a resistance of 18 Ohms. This is why it is important to select the correct resistor for the application – too much resistance will cause too much voltage drop and noise whereas too little resistance could lead to an electrical hazard.

The PF2205-0R18F1 Through Hole Resistor is a non-inductive component. This means that its inductance does not change significantly with increasing current. This makes it suitable for use in high-frequency applications, such as radio and radar. The resistor also has a high surge capability, meaning it can handle short duration overloads without damage. This makes it suitable for use in high voltage applications where the power transients may otherwise damage the resistor.

The PF2205-0R18F1 Through Hole Resistor is a precision resistor that is highly accurate. It has a temperature coefficient of 0.2% and a tolerance of up to ±0.1%. This makes it suitable for high accuracy applications, such as signal conditioning and filtering, as well as other precision circuits. The resistor also features low noise characteristics, making it particularly suitable for use in low noise analog circuits.

PF2205-0R18F1 is a Through Hole Resistor manufactured by Metreatronics Corporation. It is a radial lead fixed resistor with an 18 Ohm resistance at 25℃. It is primarily used in telecommunications, telecommunications equipment, and consumer electronics. The design of the resistor is stable so it can be used in high-reliability applications. Its low resistance, low inductance, and high surge capability makes it suitable for high voltage applications and high-frequency applications such as radio and radar. It also has good accuracy and low noise characteristics which make it suitable for high accuracy and low noise applications.

The specific data is subject to PDF, and the above content is for reference