PI74FCT162245TVE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PI74FCT162245TVE is a high performance, low-power, high speed non-inverting buffer with 3-state outputs for use in advanced applications where low voltage, fast rise and fall times, low power and high speed are required. It is commonly used in digital systems to provide logic level conversion from a low voltage, low power logic device such as a microprocessor or bus interface, to a higher voltage, higher power logic device such as a bus driver, latch or logic level translator. This device is especially useful in applications where power consumption is a concern, as the PI74FCT162245TVE provides superior performance while operating at a low voltage, typically 1.8V or 3.3V.

The PI74FCT162245TVE has four 3-state output buffers, each of which can be used to drive a low-impedance load such as a bus driver or latch. The outputs are designed to be connected to an external bus of up to 16 data lines. The device can be used with both TTL and CMOS logic, and has a wide input range of 1.4 V to 4.75 V. The PI74FCT162245TVE is capable of driving a capacitive load of up to 400pF without any additional buffering. The PI74FCT162245TVE can operate up to 54MHz, making it ideal for use in high speed applications such as video and bus interfacing. In addition, the device includes glitch-immunity logic for increased noise immunity.

The PI74FCT162245TVE is controlled by a single enable input (E#) which is used to control the state of the output buffers. When the E# input is high, the outputs are enabled and can be used to drive the bus. When the E# input is low, the outputs are disabled and the bus will remain in a high impedance state. The device also includes a pair of complementary output control inputs (OE# and OE#). When the OE# input is low, the output is enabled and the bus can be driven. When the OE# input is high, the output is disabled and the bus remains in a high impedance state.

The PI74FCT162245TVE is designed to be an easy to use and low cost solution for driving data buses in advanced digital applications. With its low power, wide voltage range, fast switching speed, and glitch-immunity logic, it is ideally suited for use in high speed data transfer applications. Its low power and wide logic level threshold range make it an ideal choice for powering FPGA devices, memory devices and microprocessors.

The PI74FCT162245TVE is designed to drive up to 16 data buses and is typically available in the 14-pin SOIC package. The device is characterized for operation from 0°C to +85°C. The PI74FCT162245TVE is a highly reliable, low-power logic buffer suitable for a variety of applications.

The specific data is subject to PDF, and the above content is for reference