PI74FCT245ATQE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PI74FCT245ATQE is a high-performance, low-cost integrated circuit (IC) composed of non-inverting three-state buffers, drivers, receivers, and transceivers. This IC is suitable for use in a wide variety of applications, including interfaces between busses, memories, microprocessors, and other peripheral components. In addition, it can be used to extend the range, simplify logic, and control various signals.

The PI74FCT245ATQE is a device that uses what is called “tri-state” logic. Tri-state logic has three possible states; logical “0”, logical “1” and high-impedance state, when the device does not interfere with the other two. The device can act as a buffer, driver, receiver, and transceiver depending on its current configuration. Buffers are configured to drive increased voltage loads and reduce the effect of spurious signals that are present on the bus. Drivers are designed to increase the speed and reliability of data transmission, while receivers are used to detect data being received.

The PI74FCT245ATQE has an operating voltage range of 2.7V to 3.6V and can handle a power dissipation of 65 mW. It has an output enable time of 2.5 us and can operate at temperatures ranging from -40°C to +85°C. Its output switching characteristics include an output rise time of 3.2 ns and an output fall time of 4.2 ns. It also features an enable time of 2.5ns and a disable time of 4.5ns. With these specifications, the PI74FCT245ATQE is suitable for use in digital systems that require fast response times.

Generally, the PI74FCT245ATQE is best suited for applications such as processor-to-memory interfacing, data transfers between micro-controllers, logic decoding, and memory output enable/disable. To increase the range and simplify logic control, the device can be cascaded to form wider bus interfaces or latch circuitry. Furthermore, the PI74FCT245ATQE can be used to reduce crosstalk and reduce the chances of erroneous data being transmitted or received. This is especially useful in applications where high-speed data transfer is required.

The PI74FCT245ATQE\'s working principle is based on several fundamentals of electrical engineering. When the enable line is at a logic high, the output buffer is enabled, and the data is sent to the output pin. If the enable line is at a logic low, the buffer is disabled, the output pin is held high-impedance, and no data is transmitted. In addition, when the enable line is both valid and active, the output pin will follow the data input as expected. This behavior can be modified with the addition of other integrated circuits to perform more advanced tasks.

The PI74FCT245ATQE is a powerful and reliable tool for use in digital systems. With its wide range of operating characteristics, it is capable of being used in a variety of applications. Its fast switching speeds, low power dissipation, and small size make it an ideal solution for high-throughput digital systems. With the proper understanding and implementation, the PI74FCT245ATQE can be a valuable asset for any digital system.

The specific data is subject to PDF, and the above content is for reference