PI74STX2G4245UEX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic-buffers, drivers, receivers, transceivers facilitate the transfer of data between different systems and devices. The PI74STX2G4245UEX is a logic device that can be used to supplement the transmission of data between devices in different applications.

The PI74STX2G4245UEX is a low power, low voltage, 2.5 V CMOS non-inverting buffer capable of driving up to 32 inputs up to 16 outputs. It provides buffered complementary outputs for increased drive capability and is also used in applications where one input is to be multiplexed to a variety of different outputs. This is achieved by combining two buffers allowing for double inputs.

The PI74STX2G4245UEX comes with two separate pins for selecting either one of two different inputs. With this feature, it is possible to select multiple inputs for output to different destinations without having to manually switch between them. The buffer lane type switching feature allows for high speed design when dealing with clock speeds higher than 2.5V.

The PI74STX2G4245UEX is available in 8-pin SOT23, uA-SOIC, or PDIP packages. Its features make it an ideal choice for applications requiring controlled data flow, such as cell-based memories, SRAM’s, DRAM’s, Pipelined DRAM’s, MP3 players and other systems with multiple data-processing components, where signals need to be finely regulated. The PI74STX2G4245UEX can also be used in other logic applications, including clocks and counter logic.

The logic device works on a two-stage logic level. The first stage is the input buffer, which amplifies small signal levels, limiting the signal reflection reaching the receiver and providing increased drive capability. The second stage is the output buffer, which is used to achieve low output impedance and high output drive capability for better noise immunity and increased data rate at the output end.

The PI74STX2G4245UEX logic device is designed for flexibility and reliability. It is protected against static discharge and fault currents, and can support a wide range of different input frequencies and logic voltage levels. The logic device features thin film isolation technology and a maxiumum power dissipation of 1.5 W.

The PI74STX2G4245UEX is well-suited for mission- and safety-critical applications where electrical noise, vibration, and shock must be considered. It is approved by the NSF and FCC, guaranteeing that the device meets all relevant standards; and is the ideal logic device for applications with large and noisy signals.

Overall, the PI74STX2G4245UEX is a robust logic device that is optimized for reliable data transfer in a variety of data-intensive applications. Its two-stage logic level and buffer lane type switching feature make it an ideal choice for high speed designs and signal integrity. Moreover, this device is also designed for reliability and safety, making it suitable for mission- and safety-critical applications. With the PI74STX2G4245UEX, users can be assured of reliable and safe data transfer.

The specific data is subject to PDF, and the above content is for reference