PI7C8150ANDE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PI7C8150A from Pericom is a high-speed, low-power USB 2.0 jitter attenuator. It features a 15 kHz to 480 MHz frequency range and an ultra-low jitter of 1 picosecond RMS. The device also dissipates low power and has good power supply noise immunity, making it ideal for applications that require high performance and low power. The PI7C8150A supports various USB 2.0 applications, such as USB 2.0 DisplayPort adapters and USB 2.0 host controllers. This article will provide an overview and discuss the application field, working principle, and key features of the PI7C8150A.

Application Field

The PI7C8150A can be used in a large number of high-bandwidth applications such as DisplayPort, HDMI, and USB 2.0 applications. It has a maximum data rate of up to 12Mbps, allowing it to process high-bandwidth signals without compromising signal integrity. It can also be used alongside other transceivers and mux/demux devices to support complex signal routing and re-timing requirements. Furthermore, the PI7C8150A can also be used as an in-line signal conditioning device to improve signal integrity in new and existing system designs.

Working Principle

The PI7C8150A jitter attenuator consists of two main components: a pre-driver and an output stage. The pre-driver section of the device amplifies and filters the incoming signal to improve signal integrity. The signal is then received by the output stage, which compensates for signal delay and jitter, thus improving the signal-to-noise ratio. The PI7C8150A then sends a properly attenuated signal to the USB 2.0 device. This type of jitter attenuator is especially useful for applications that require high performance but low power consumption.

Key Features

The PI7C8150A is a high-speed, low-power jitter attenuator with a 15 kHz to 480 MHz range. It has an ultra-low jitter of 1 ps RMS and supports data rates of up to 12 Mbps. Its power consumption is very low, making it ideal for applications that require high performance and low power. Additionally, the PI7C8150A is highly resistant to power supply noise ‒ the device has excellent common mode rejection and crosstalk immunity, allowing it to process high bandwidth signals without compromising signal integrity. Lastly, the PI7C8150A has an active Skew Equalizer (ASE) to provide frequency response correction for improved signal integrity.

In conclusion, the PI7C8150A is an ideal solution for applications that require high performance and low power. It features a 15 kHz to 480 MHz frequency range and an ultra-low jitter of 1 ps RMS. It can also be used as an in-line signal conditioning device to improve signal integrity in new and existing system designs. The PI7C8150A is highly resistant to power supply noise, has excellent common mode rejection and crosstalk immunity, and has an active Skew Equalizer (ASE) to provide frequency response correction for improved signal integrity. All of these features make the PI7C8150A an ideal solution for high-bandwidth applications such as DisplayPort, HDMI, and USB 2.0 applications.

The specific data is subject to PDF, and the above content is for reference