PL9132

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, such as the PL9132, are electrical components that are used to store electrical energy and provide a impedance or inductance to a circuit. They are used to regulate the current or voltage in the circuit, dampen out any electrical noise and act as an AC filter. The PL9132 is a type of inductor with a fixed inductance that is suitable for high frequency and high power applications in the telecommunication and data processing industries.

The PL9132 is constructed with two separate windings that are wound around a core material such as iron or ferrite. The two windings are electrically isolated from one another such that an external voltages across the terminals of one winding will not affect the other. This allows the inductor to be used in either series or parallel configurations, depending on the application.

The inductance of the PL9132 is determined by the number of turns in the winding and the permeability of the core material. In order to provide proper inductance for a particular application, it is important to select an appropriate material for the core such as ferrite or iron. The more turns in the winding, the higher the inductance and the less the voltage/current capacity of the inductor.

The operating frequency range for the PL9132 is from 200kHz to 1MHz. This high frequency range is suitable for applications such as RF and microwave, where very high speeds are required. The inductor is also rated for up to 2A current, allowing it to handle power levels up to 12 watts. The high efficiency of the inductor ensures minimal power dissipation in applications where high power is needed. The compact size of the PL9132 also makes it a suitable choice for portable devices.

The working principle of the PL9132 is based on Faradays law of induction. Whenever a voltage is applied across the terminals of the inductor, it induces a current in the windings which is proportional to the applied voltage and the inductance. This induced current then passes through the core material and creates a magnetic field. This magnetic field then induces a voltage in the opposite direction which opposes the applied voltage, leading to a decrease in current. This phenomenon is known as impedance and is the basis of how inductors work.

The PL9132 is a versatile inductor that can be used in a variety of applications such as RF and microwave, power supplies, switching power converters and oscillator circuits. Its high frequency range, power rating, efficiency and compact size make it an ideal solution for designers looking to maximize performance while minimizing size and cost.

The specific data is subject to PDF, and the above content is for reference