PM5-KNAD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Panel indicators, pilot lights, and the PM5-KNAD are important components of machines and electrical devices. The PM5-KNAD is a light signal indicator used to provide a visual indication whenever a voltage is present. The product is made up of five compact, easy to use components: the PM5-LED, the PM5-SDR, the PM5-TR, the PM5-RRC and the PM5-C-2.

The PM5-LED is the most basic component of the PM5-KNAD. It consists of a 3x6 mm LED, a mating socket and an indicator light. The LED is a 5mm, LED type LED, having a nominal voltage drop of 1.6V. The mating socket consists of three rectangular contacts that snap on to the LED connections. Finally, the indicator light consists of a coloured LED that is designed to be easily visible.

The PM5-SDR is a unit composed of a screwdriver, a holder and an 8 contact relay. The screwdriver is used to remove or insert components on the relay board. The holder, composed of four plastic fasteners, is designed to securely hold the components in place on the board. Finally, the 8 contact relay consists of a red, yellow, and green LED.

The PM5-TR is the third component of the PM5-KNAD. It consists of a terminal block, a resistor network and a mechanical switch. The terminal block is attached to the resistor network, which consists of two resistors, each having a nominal resistance of 250 Ohms. The resistor network is used to protect the LEDs from electrical noise. Finally, the mechanical switch is composed of two contact blades which are connected to a voltage source. In the absence of a voltage, the blades remain open; but when a voltage is present, the blades close, allowing the LEDs to light up.

The PM5-RRC is the fourth component of the PM5-KNAD. It consists of a resistor, a transformer, a capacitor, and a protection diode. The resistor is used to show current flow in the circuit. The transformer regulates the input voltage to the circuit and is designed to reduce voltage spikes. The capacitor stores and discharges energy during peak demand periods. Finally, the protection diode limits the amount of current that flows through the circuit.

The PM5-C-2 is the fifth component of the PM5-KNAD. It consists of two resistors; one of them is used to regulate the current flow in the circuit, while the other is used to regulate the voltage. The resistors are connected in series, meaning that any increase in current will result in an increase in voltage. This allows the PM5-KNAD to work with different automotive systems.

Now that the components of the PM5-KNAD have been explained, it is time to talk about its application field and working principle. The PM5-KNAD is mainly used in automotive systems, where it is used to offer a visual indication whenever a voltage is present. To use the PM5-KNAD, the user first connects the LEDs to the voltage source. Then they connect the output of the LEDs to the relay board. The voltage is controlled by the resistor network, allowing the LEDs to light up whenever a voltage is present. As soon as the voltage drops, the LEDs shut off. This process is repeated until the voltage is above a certain level, at which point the LEDs turn on again. The PM5-KNAD is a versatile unit, capable of working with different types of vehicles and is a reliable way to provide a visual indication for any voltage that is present in an automotive system.

The specific data is subject to PDF, and the above content is for reference