PMC-24V075W1AJ

Power (Watts):	75W
Approvals:	CB, CCC, CE, cURus, Nemko
Minimum Load Required:	--
Size / Dimension:	5.04" L x 3.82" W x 1.50" H (128.0mm x 97.0mm x 38.0mm)
Mounting Type:	Chassis Mount
Features:	Adjustable Output, DC Input Capable, Universal Input
Operating Temperature:	-10°C ~ 70°C (With Derating)
Efficiency:	87%
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Series:	PMC
Current - Output (Max):	3.12A
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	24V
Voltage - Input:	85 ~ 264 VAC
Number of Outputs:	1
Type:	Enclosed
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

AC/DC converters are power supplies which convert alternating current (AC) to direct current (DC). They are used in a variety of applications, from consumer electronics to industrial and medical equipment. The PMC-24V075W1AJ is a DC/DC converter which can convert an input of 24 volts to a regulated output voltage of 7.5 volts with a maximum output current of 1.2 Amps. In this article, we\'ll discuss the application field and working principle of the PMC-24V075W1AJ.

Application Field

The PMC-24V075W1AJ is often used in computers, telecommunication equipment, industrial control systems, security systems, test and measurement systems, and consumer electronics. It can be used to provide a regulated DC voltage to power a variety of electronic circuits. The wide input range and reliable operation make it suitable for a wide range of applications.The PMC-24V075W1AJ is also suitable for automotive applications, such as security systems, test equipment, and in-vehicle entertainment systems. In these applications, the converter can provide the necessary DC power while withstanding the environmental conditions of a vehicle.

Working Principle

The PMC-24V075W1AJ is a DC/DC converter which uses a switching regulator to regulate the output voltage. The converter has two input pins where the input voltage is applied. The input voltage is supplied to a switching regulator circuit which uses a transformer to step up or step down the voltage depending on the output voltage. The switching regulator then regulates the voltage to the desired output voltage by rapidly switching the input voltage on and off.The output of the switching regulator is then applied to an output offset voltage regulator. This circuit regulates the voltage at the output by comparing the output voltage to a reference voltage. The output offset voltage regulator adjusts the voltage to the desired output by controlling the current flow through the device.The PMC-24V075W1AJ has protection features which protect the device from over-current, over-voltage, and short-circuit conditions. In case of over-voltage, the device will shut down and will resume normal operation when the voltage normalizes.

Conclusion

The PMC-24V075W1AJ is a DC/DC converter which converts an input voltage of 24 volts to a regulated output voltage of 7.5 volts with a maximum output current of 1.2 Amps. It is suitable for a wide range of applications, from computers to automotive applications. The converter uses a switching regulator circuit to step up or step down the voltage depending on the output voltage, and an output offset voltage regulator which adjusts the voltage to the desired output. The device also has protection features which protect it from over-voltage, over-current, and short-circuit conditions.

The specific data is subject to PDF, and the above content is for reference