Allicdata Part #: | 994-1050-ND |
Manufacturer Part#: |
POE-24IR |
Price: | $ 24.58 |
Product Category: | Power Supplies - External/Internal (Off-Board) |
Manufacturer: | Laird Technologies IAS |
Short Description: | POE INJECTOR 19.2W 24V DESKTOP |
More Detail: | 24V Power Over Ethernet (POE) 1 Port Midspan Injec... |
DataSheet: | POE-24IR Datasheet/PDF |
Quantity: | 8 |
1 +: | $ 22.33980 |
10 +: | $ 20.66460 |
25 +: | $ 18.98900 |
100 +: | $ 17.64850 |
250 +: | $ 16.19630 |
Series: | -- |
Part Status: | Active |
Type: | Midspan Injector |
Voltage - Input: | 90 ~ 264 VAC |
Number of Ports: | 1 |
Voltage - Output: | 24V |
Current - Output: | 800mA |
Power (Watts) - Per Port: | 19.2W |
Compliance: | IEEE802.3af |
Data Rate: | -- |
Features: | OCP, SCP |
Operating Temperature: | -10°C ~ 60°C |
Efficiency: | 70% |
Mounting Type: | Desktop |
Size / Dimension: | 3.25" L x 3.00" W x 1.50" H (82.6mm x 76.2mm x 38.1mm) |
Note: | AC Power Cord Included |
Input Connector: | IEC 320-C6 |
Output Connector: | RJ45 (Data, Power) |
Approvals: | CE, EN |
Weight: | 0.324 lb (146.96g) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power over Ethernet (PoE) is a technology that allows a single cable to carry both electrical power and data. It was introduced in 2001 and has since been used in many applications, from powering CCTV cameras to supporting wireless networks. One of the most popular PoE applications is the POE-24IR, a powered infrared camera. This article will explain the application field and working principle of the POE-24IR.
The POE-24IR is a network-enabled camera that is powered over Ethernet. It is used mainly for surveillance and security as it enables users to capture high-resolution images in low-light environments such as parking lots, hallways, and other public areas. The camera is equipped with an infrared filter that allows it to capture clear images even in complete darkness. The POE-24IR also has an onboard recording system, allowing users to record videos directly to an onboard SD card for later viewing.
The working principle of the POE-24IR is quite simple. To power the device, users connect it to an Ethernet cable that carries a low-voltage Direct Current (DC). This DC signal is then translated into usable power that can be used to power the camera and its associated components, such as the IR filter and the onboard recording system. The data signal, which contains the images and videos captured by the camera, is also sent across the same Ethernet cable, allowing users to view the images and videos remotely.
The POE-24IR is best suited for applications where power and data are needed in a single cable. Security and surveillance are the primary examples, as it enables users to install cameras in hard-to-reach locations without the need for additional wiring. It is also ideal for large-scale projects where cable installation is difficult, such as in airports, hospitals, and stadiums. In addition, the POE-24IR is cost-effective as it reduces the need for extra cables and power supplies.
The POE-24IR is a reliable and versatile device that is widely used in many applications. Its ability to transmit both power and data over a single cable makes it an ideal solution for projects that need to be powered and connected remotely. Its low-voltage Direct Current (DC) power source and onboard recording system make it a powerful tool for surveillance and security, while its versatility makes it a cost-effective solution for large-scale projects.
The specific data is subject to PDF, and the above content is for reference
POE INJECTOR 30W 55V DESKTOP55V Power Ov...
POE PSE MODULE3.3V Power Over Ethernet (...
POE PSE MODULE3.3V Power Over Ethernet (...
POE PSE MODULE3.3V Power Over Ethernet (...
POE PSE MODULE3.3V Power Over Ethernet (...
GHOSTBRIDGE 100-240VAC TO 24VDC24V Power...