POE-48I-CI-EU

Features:	OCP, SCP
Weight:	0.324 lb (146.96g)
Approvals:	CE, EN
Output Connector:	RJ45 (Data, Power)
Input Connector:	IEC 320-C6
Note:	AC Power Cord Included
Size / Dimension:	3.25" L x 3.00" W x 1.50" H (82.6mm x 76.2mm x 38.1mm)
Mounting Type:	Desktop
Efficiency:	70%
Operating Temperature:	-10°C ~ 60°C
Series:	--
Data Rate:	--
Compliance:	IEEE802.3af
Power (Watts) - Per Port:	24W
Current - Output:	500mA
Voltage - Output:	48V
Number of Ports:	1
Voltage - Input:	90 ~ 264 VAC
Type:	Midspan Injector
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

• Introduction to Power over Ethernet (PoE)

Power over Ethernet (PoE) is an industry standard for connecting, powering, and transmitting Ethernet data using existing network infrastructure, typically using a single cable or wire. This is especially useful for powering IP cameras, WLAN access points, and other devices remotely. In addition, PoE simplifies networking installations, as devices can be connected to the network without the need for separate power supplies or cables.

• POE-48I-CI-EU Application Field and Working Principle

The POE-48I-CI-EU is an Ethernet-capable power over-the-air (PoE) power adapter, designed for use in IP cameras, Wi-Fi access points, and other PoE-enabled devices. This adapter converts electrical power into an Ethernet-compatible signal for powering devices over the network.The POE-48I-CI-EU has a 48 VDC input voltage, connecting to the power source, and a 4-6 volt output voltage, compatible with the voltage of PoE-enabled devices. It is enclosed in an outdoor-rated ABS plastic housing to protect the adapter from the elements, with an operating temperature range of -40 to 125°F (-40 to 52°C). It is also UL listed and FCC approved.The POE-48I-CI-EU is easy to install, as it only requires connecting the electro-mechanical and electrical components to the source of the voltage. Once this is done, the power is conducted from the source to the device through the adapter. This minimizes the amount of cabling required for the installation.In addition, the POE-48I-CI-EU offers excellent electrical performance, with an outputripple of less than 1 mV peak-to-peak. It also offers high accuracy, with an output voltage accuracy of ±5%.All in all, the POE-48I-CI-EU is an excellent way to power up remotely located PoE-enabled devices, such as IP cameras, WLAN access points, and other devices. It’s easy to install and has excellent electrical performance.

The specific data is subject to PDF, and the above content is for reference