Allicdata Part #: | POE-PS-150-001-ND |
Manufacturer Part#: |
POE-PS-150-001 |
Price: | $ 4.81 |
Product Category: | Power Supplies - External/Internal (Off-Board) |
Manufacturer: | Laird Technologies IAS |
Short Description: | POE SPLITTER DESKTOP |
More Detail: | Power Over Ethernet (POE) 1 Port Splitter |
DataSheet: | POE-PS-150-001 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 4.37220 |
Features: | -- |
Weight: | -- |
Approvals: | CE |
Output Connector: | 2.1mm Plug (Power), RJ45 (Data) |
Input Connector: | RJ45 (Data, Power) |
Note: | -- |
Size / Dimension: | 1.10" L x 0.63" W x 0.91" H (28.0mm x 16.0mm x 23.0mm) |
Mounting Type: | Desktop |
Efficiency: | -- |
Operating Temperature: | 0°C ~ 70°C |
Series: | -- |
Data Rate: | -- |
Compliance: | -- |
Power (Watts) - Per Port: | -- |
Voltage - Output: | -- |
Number of Ports: | 1 |
Voltage - Input: | -- |
Type: | Splitter |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power over Ethernet (PoE) is a technology developed to enable the transfer of power over Ethernet cables. PoE is used to provide remote network and power services to PDs (powered devices) such as IP phones, surveillance cameras, wireless access points, etc. The PoE technology is based on a standards-based architecture that is interoperable between all vendors.
POE-PS-150-001 is a Power Sourcing Equipment (PSE). It is a device that supplies power to powered devices. The PSE has a port that is connected to both the power source and data cables. It draws power from the power source, processes it and then sends the power over the data cables.
The POE-PS-150-001 is designed for small network environments with up to 4 PDs connected simultaneously. It works on a single-port, so only one port must be available for each device to receive power. The POE-PS-150-001 also requires a minimum cable length of 6 meters for each powered device.
The primary application for the POE-PS-150-001 is in powering wireless access points and IP phones. It can also be used for other PDs such as surveillance cameras or other low-power devices. The device is designed to be compliant with the IEEE 802.3af PoE standard.
The working principle of the POE-PS-150-001 is quite simple. The PSE receives power from a power source, processes it and then sends it out over the Ethernet data cables. When the PD is connected to the port, it will draw power from the PSE. The PSE will detect the PD\'s current requirements and adjust the output voltage accordingly.
The POE-PS-150-001 is an economical solution for providing power to remote devices. It is a cost-effective solution for networking and powering devices in a small and remote environment. The device is also a reliable and robust solution for running PDs over long distances and with a variety of different devices.
The specific data is subject to PDF, and the above content is for reference
POE INJECTOR 30W 55V DESKTOP55V Power Ov...
POE PSE MODULE3.3V Power Over Ethernet (...
POE PSE MODULE3.3V Power Over Ethernet (...
POE PSE MODULE3.3V Power Over Ethernet (...
POE PSE MODULE3.3V Power Over Ethernet (...
GHOSTBRIDGE 100-240VAC TO 24VDC24V Power...