PP11-4-7.50A-9364-1-V

Series:	SNAPAK®
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	--
Number of Poles:	1
Actuator Type:	Push-Pull Plunger
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Circuit breakers are devices that are used to detect and interrupt an electrical overload or a short circuit. In general, circuit breakers are used to protect people, property and equipment from potential hazards caused by electrical problems. This article will discuss the application field and working principle of the PP11-4-7.50A-9364-1-V circuit breaker.

Application Field

The PP11-4-7.50A-9364-1-V circuit breaker is a device used in residential and commercial applications. It is used for overcurrent protection, such as when too much current passes through a wire, or when too many electrical devices are connected to a single circuit. It is also used in low-voltage systems, such as those in a home, to protect electrical equipment and people from electrical shock.

Working Principle

The PP11-4-7.50A-9364-1-V circuit breaker is designed to detect and interrupt an electrical overload or a short circuit. It works by detecting an increase in the current flow that is higher than that which is normal for the circuit. It then sends a signal to interrupt the current flow, thus preventing potential hazards from occurring.In order for the circuit breaker to work properly, it must be properly rated for the specific application in which it is being used. This means that it must be rated for the same voltage and current as the circuit it is being used on. It also needs to be installed in accordance with local codes and regulations.Once the circuit breaker is installed properly, it should be tested regularly to make sure it is still working properly. If it is not working properly, it should be replaced with a new one.

Conclusion

The PP11-4-7.50A-9364-1-V circuit breaker is a device used in residential and commercial applications for overcurrent protection. It works by detecting an increase in the current flow that is higher than that which is normal for the circuit, and then interrupting the current flow to prevent potential hazards from occurring. In order to ensure it functions properly, it should be properly rated for the specific application in which it is being used, as well as installed in accordance with local codes and regulations. Additionally, it should be tested regularly to make sure it is still working properly.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description