PR11-1-7.00A-8934-1-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are vital components of an electrical network that help protect people and systems from electrical shock and faults. From the residential consumer to the energy provider, it is imperative to understand the protective device in the event of an electrical fault or surge. PR11-1-7.00A-8934-1-V circuit breakers are commonly used to protect against electrical shocks and damage due to overloading and short circuits.

There are two main components of a circuit breaker, the operating mechanism and the contacts. The operating mechanism is responsible for sensing when power has been exceeded or shorted out and in turn, shutting off the power. Contacts are the pieces that physically connect the circuit breaker to the power source and electrical appliance. The contacts in a PR11-1-7.00A-8934-1-V circuit breaker are typically made of copper or aluminum and are used to isolate the breaker from the power supply when it is tripped.

A PR11-1-7.00A-8934-1-V circuit breaker is designed to detect any events that can result in an inappropriate electrical flow and as a result, it is predetermined to disconnect power in order to protect the system from a possible overload. This type of circuit breaker is usually used for residential, industrial and commercial operations and has a variety of applications ranging from heating and cooling to lighting and running heavy machinery.

Additionally, PR11-1-7.00A-8934-1-V circuit breakers are also capable of providing protection against short-circuiting and ground faults. When an unintended short circuit or ground fault occurs, the operating mechanism will sense high current and will then disconnect the power to avoid damage to the system. By safely disconnecting power, it protects the wires and circuits from being overloaded, which can lead to damage and the possibility of electric shock.

The functioning of a PR11-1-7.00A-8934-1-V circuit breaker depends on the type and rating of the device. For residential use, the rating is typically 120/240 volts, meaning that a circuit breaker can handle a maximum load of 120/240 volts. For commercial and industrial applications, the ratings are usually higher, up to 600 volts, and the circuit breaker is usually designed to tripping at lower current than for residential applications.

In general, the working principle of a PR11-1-7.00A-8934-1-V circuit breaker is quite simple. The operating mechanism is responsible for sensing any excessive current in the circuit, causing the contacts connected to the breaker to shut off the power. By providing an additional layer of protection, circuit breakers can help prevent both people and the electrical system from sustaining damage.

The specific data is subject to PDF, and the above content is for reference