PS-30PE-D4LT1-B1E

PS-30PE-D4LT1-B1E Application Field and Working Principle

Rectangular connectors, commonly referred to as headers, are a type of electrical or electronic component which provides reliable electrical contact between two or more component circuits. Rectangular connectors are used primarily in the aviation, automotive, aerospace, telecommunications, computing, and industrial industries. Their design and construction usually vary according to their intended application.

One of the most common types of connectors are the male pins. Male pins are characterized by the long pins at the ends of the connector, commonly referred to as “pins”, which protrude from the center of the connector. These pins mate with the female connectors, typically located on other electrical components, such as printed circuits or power supplies.

The PS-30PE-D4LT1-B1E is a male pin which is primarily used for the unmating of two printed circuits. It is a dual row type male pin connector which is also referred to as an IDC connector. It is mainly used when long electrical connectivity is required.

The PS-30PE-D4LT1-B1E uses the standard two-row header design with two rows of twenty-two pins each. This allows for a total of forty-four pins to be connected at any given time. The pins are arranged on a double row which is spaced 2.54mm (or 0.1”) apart from the nearest row. It has a maximum current rating of 2.0 Amps, with a rated voltage of 0.3Vdc.

As the PS-30PE-D4LT1-B1E is not a socketed connector, it is generally used when a sealed connection is not required. This is because they can be soldered directly onto a circuit board or component. The pins are also generally used when the user wishes to disconnect and reconnect several times.

The PS-30PE-D4LT1-B1E is typically used in both commercial and residential applications. In most cases, they are used to connect electrical appliance, computer, and communication devices to a power source. They are also used to mate two or more general printed circuit boards (PCBs) together. The male pin provides a secure connection between the two PCBs and works to protect them from electrical shorts.

The working principle of the PS-30PE-D4LT1-B1E is that it uses pins which make contact with the female connectors on another electrical component, thus allowing electricity to flow through the connector. The pins are held in place by the connector housing, which is usually made from injection molded plastic. The pins are then adjusted to the desired position to ensure tight contact with the female components.

In conclusion, the PS-30PE-D4LT1-B1E is a type of male pin connector primarily used for the unmating of two printed circuits. It is primarily used in commercial and residential applications, and it uses pins to make contact with the female components on the other side, thus allowing a secure connection between the two components. The pins are held in place by the injection molded plastic housing and can be adjusted to ensure a tight connection.