PSM4-101M-10T2

Series:	PSM
Packaging:	Tape & Reel (TR)
Part Status:	Discontinued at Digi-Key
Capacitance:	100pF
Tolerance:	±20%
Voltage - Rated:	200V
Current:	10A
DC Resistance (DCR) (Max):	0.5 mOhm
Operating Temperature:	-55°C ~ 125°C
Insertion Loss:	--
Temperature Coefficient:	--
Ratings:	--
Package / Case:	3-PSM
Size / Dimension:	0.315" L x 0.118" W (8.00mm x 3.00mm)
Height (Max):	0.118" (3.00mm)
Thread Size:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Feed Through Capacitors – PSM4-101M-10T2 application field and working principle

Feed Through Capacitors (FTCs) are important components in the development of high-frequency circuits, and are extensively used in industries where electrical and electronic components are integral parts of the products. The PSM4-101M-10T2 is a type of Feed Through Capacitor commonly used for high-frequency, vibration-resistant operation applications.FTCs have a variety of applications ranging from data transmission and process control to communication and detection systems. The PSM4-101M-10T2, in particular, is frequently used in digital and IC-based systems. It is designed to filter and filter-out unwanted signals and prevent over-heating due to excessive power levels in electronic circuits.The PSM4-101M-10T2 consists of four parallel parts: the two main parts, the filter core and the shield. The filter core functions to filter frequency from very high to low, while the shield protects the core from vibrations and other external interference. The two remaining parts, the earth plate and the ground side plate, both use inductors to transfer power between the two sides of the capacitor.The PSM4-101M-10T2 works by creating a self-correcting impedance which is less than the total impedance of the circuit. This is accomplished by combining capacitors and inductors in parallel arrangements. This arrangement results in the capacitor\'s impedance being higher than the total impedance of the circuit, allowing more current to flow and reducing signal frequencies.The PSM4-101M-10T2 also offers protection from damaging high-frequency signals by reducing the amount of electrical noise produced when current flows through the circuit. While this protection is designed to be effective against high-frequency noise, it is not necessarily foolproof and other types of protection may still be required.In addition to filtering signals and providing protection from high-frequency signals, the PSM4-101M-10T2 also uses the shielding of the capacitor to limit the spread of circuit noise away from the circuitry. This shielding prevents the formation of high-frequency oscillations, which would otherwise cause interference with other components within the system.The PSM4-101M-10T2 is an excellent choice for applications where ruggedness, vibration-resistance, and high-frequency noise-limiting protection are required. With its ability to filter and reduce high-frequency signals while at the same time providing shielding, the PSM4-101M-10T2 is an ideal choice for many applications. It is highly reliable, easy to install, and cost-effective, making it an ideal solution for many high-frequency applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description