PSP500JR-10R

Series:	PSP
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	10 Ohms
Tolerance:	±5%
Power (Watts):	5W
Composition:	Wirewound
Features:	Anti-Arc, Flame Proof, Moisture Resistant, Safety
Temperature Coefficient:	--
Operating Temperature:	-55°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.252" Square x 0.984" L (6.40mm x 25.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: PSP500JR-10R

Through hole resistors are among the most common types of resistors used in electronics today. The PSP500JR-10R is one of the larger resistors used in through-hole applications. It is a through-hole type resistor with a rated power of 10 Watts, convenience of installation, and a large range of resistance values (from 10Ω to 100KΩ).The PSP500JR-10R is a relatively large resistor and is able to handle quite a bit of current. It is usually mounted on its own heat-sink, which is essential to keep it from overheating and burning out. These components have been used for decades and offer reliable performance and easy installation in a wide range of applications.The PSP500JR-10R is often used in power circuits, where high current must be dissipated safely and efficiently. These components are used in everything from small electronics projects to commercial applications in which they’re used as voltage regulators or as current limiting resistors.The PSP500JR-10R works by dissipating power which allows for voltage or current regulation. The resistor absorbs the power and limits the current in the circuit. The amount of voltage or current that can be regulated is determined by the size and type of resistor chosen. This is why it is important to carefully select the appropriate resistor for any application.The PSP500JR-10R relies on the principle of Joule heating to dissipate the power in the form of heat. This is the energy released when electric current flows through a material. Joule heating can be opposed to the natural cooling process through the design of heat sinks or radiators. Good engineering practice dictates that the right cooling mechanisms are used to ensure that the component temperatures remain within design limits.The PSP500JR-10R has become a very popular choice for many applications, especially in industrial and professional grade applications. The wide range of ratings make it suitable for a variety of applications in which a higher voltage or current rating than the standard through-hole resistor is required. The resistor is often packaged with a heat sink, allowing for easier installation and higher dissipation of heat.In conclusion, the PSP500JR-10R is a through-hole resistor used in many applications where rated power needs to be dissipated safely and efficiently. It uses Joule heating as its working principle and needs cooling in order to prevent overheating. It is usually packaged with its own heat sink to ensure cooler operation and easier installation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description