| Allicdata Part #: | PV-2A10-2P-ND |
| Manufacturer Part#: |
PV-2A10-2P |
| Price: | $ 17.83 |
| Product Category: | Circuit Protection |
| Manufacturer: | Eaton |
| Short Description: | FUSE CARTRIDGE 2A 1KVDC RAD BEND |
| More Detail: | N/A |
| DataSheet: |  PV-2A10-2P Datasheet/PDF |
| Quantity: | 1000 |
| Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
| Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
| 10 +: | $ 16.21240 |
| Applications: | Solar (Photovoltaic) |
| Melting I²t: | 1.2 |
| Size / Dimension: | 0.406" Dia x 1.543" L (10.30mm x 39.20mm) |
| Package / Case: | Radial Bend Cylinder |
| Mounting Type: | Through Hole |
| Breaking Capacity @ Rated Voltage: | 50kA |
| Operating Temperature: | -40°C ~ 90°C |
| Approvals: | CCC, CSA, UL |
| Class: | -- |
| Features: | -- |
| Series: | PV |
| Response Time: | -- |
| Voltage Rating - DC: | 1kV |
| Current Rating: | 2A |
| Fuse Type: | Cartridge |
| Moisture Sensitivity Level (MSL): | -- |
| Part Status: | Active |
| Lead Free Status / RoHS Status: | -- |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Electrical, Specialty Fuses: PV-2A10-2P Application Field and Working Principle
PV-2A10-2P (or Pitch Versatile, 10 Amp, 2 pole) is a type of specialty fuses that is often used in automotive, telecommunications, and other electrical applications. In this article, we will look at the application field and working principle of PV-2A10-2P.
Application Field
PV-2A10-2P fuses are used for the protection of antennas and other equipment used in long-distance communications. This type of fuse is also often used on automotive electrical systems, as well as other motorized applications. In all these application fields, the fuse provides protection of the component against electrical overloads.
Working Principle
Essentially, the PV-2A10-2P fuse works in a similar way as any other fuse. It consists of two poles connected together, with one pole connected to a power source and the other connected to the equipment being protected. The fuse is designed to heat up when the current passing through it exceeds a certain threshold, causing it to break the circuit and shut down the power supply to the equipment.
When the fuse is cold, it will naturally pass a larger current than when it is hot. This means that when the current load is below the breaking point of the fuse, no interruption will occur, and the power supply will remain stable. When the current load exceeds the breaking point of the fuse, the fuse will heat up, eventually melting the link and cutting off the power supply. The fuse is designed to be able to break high enough current loads that would be otherwise sufficient to cause serious damage to the components.
Summary
In summary, PV-2A10-2P is a type of specialty fuses designed specifically for automotive, telecommunications, and other electrical applications. It works by heating up when the current passing through it exceeds a certain threshold, causing it to break the circuit and shut down the power supply to the equipment. In this way, the fuse can provide adequate protection against electrical overloads.
The specific data is subject to PDF, and the above content is for reference
FUSE CARTRIDGE 9A 600VAC/250VDC
FUSE SQUARE 50A 690VAC RECT
FUSE CRTRDGE 2.1KA 600VAC/480VDC
FUSE CRTRDGE 1.4KA 600VAC/480VDC
FUSE CARTRIDGE 150A 5.5KVAC
FUSE CARTRIDGE 10A 15.5KVAC CYL