PV-2A10F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PV-2A10F is a specialty fuse designed for use in the electrical industry. It is a direct current (DC) fuse, with a rating of 10 amps and a voltage rating of 32V. The fuse has a temperature rating of 105 degrees Celsius and an interrupting rating of 10 amps. The fuse is made of an alloy of copper, silver and manganese. It has a hollow body construction, and a thin metal pin design, which allows it to be mounted securely and conveniently in an appropriate fuse holder. The fuse is connected to the power source by means of two screws, and is designed to snap into place when the two screws are tightened.

The PV-2A10F is designed to protect electrical circuits and systems from damage due to a short circuit or overload. It is designed to open the circuit within a fraction of a second of an overcurrent or overload, and to retain its open position until the current is restored to normal. The design of the fuse also prevents it from “blowing”, or melting, until the current reaches a level which is several times its rated current. This ensures that the fuse will open the circuit before any serious damage can occur to the circuit or system.

The operation of the PV-2A10F is based on the heating effect of the current passing through it. When the current increases to a level which is higher than the rating of the fuse, Joule heating occurs in the fuse, and the fuse wire melts. The molten metal then flows away, causing an open circuit and blocking the current. When the current is restored to the normal level, the fuse cools and a new metal bridge is formed within the fuse, allowing normal current to flow again.

The PV-2A10F is commonly used in electrical installations, particularly in automotive, marine, and industrial applications. It can be used to protect a range of electrical circuits and systems, including battery chargers, radios, motors, pumps, refrigerators, and other electrical systems. It offers reliable protection against overcurrent and overloads and is designed to last for many years.

In conclusion, the PV-2A10F is a specialty fuse manufactured for use in the electrical industry. It is designed to open the circuit quickly in the event of a short circuit or overload, while at the same time preventing damage to the circuit or system. It is a reliable fuse that is designed to last for many years and can be used to protect a variety of electrical circuits and systems.

The specific data is subject to PDF, and the above content is for reference